Officina Stellare Veloce RH 250 Riccardi-Honders Astrograph Telescope
The Officina Stellare Veloce RH 250 Riccardi-Honders Astrograph is a premier, innovative, Officina Stellare exclusive! Just check out the primary Mangin mirror optical design, large front full aperture corrector lens and near zero expansion glass for the primary and secondary mirror. It even has two spaced elements for the rear group. We're talking about 250 mm of clear aperture, an F/5.6 focal ratio and a focal length of 1400 mm. Add to that a fully illuminated and corrected 60 mm field, an exclusive double stage split internal light baffle, and a maximum 3.6 micro spot size at the field's edge.
All the mechanical parts for the the OTA are machined using CNC computer assisted machines and from a whole block of aluminum to guarantee the best possible precision. Also the carbon fiber components are produced following strict specification and tolerances. Each part has been computer designed and optimized for the best structural performance, rigidity and lightness. The holding systems for both mirrors, the spider, rings and all the structural components, even the smallest, are CNC machined from a single block of special aluminum (6061/7075, Ergal and Anticorodal), stainless steel, titanium and brass. The athermic tube is made of true carbon-graphite fiber obtained with the use of high vacuum process, allowing us to obtain the best stability of the focus vs temperature changes still maintaining the best structural rigidity and lightness.
Great care is taken in the making of the rear holding cell of the primary mirror. The entire rear cell for the primary mirror is figured to have the best rigidity/weight ratio and for the fastest possible thermal stabilization between the environment and mirror. The convection and thermal irradiation are greatly improved with the use of three high quality axial fans in the back of the cell.
Great attention has been applied to simplify the collimation between the mirrors resulting in a stable, efficient but easy to use system. The collimation is accomplished by acting on just three points (the minimum required points to generate a single plane) using a special, great diameter preloaded bolts (one for each point). This results in a single hand use, simply turn the bolt left or right to move the mirror back and forth (no more complicated operations using push pull screws and locks) in a very intuitive way. Finding the correct positions is a snap. The mirror borders uses an opaque, circular mask to avoid any undesired light scattering. The light shields for the primary and secondary mirrors are computer designed and optimized to ensure complete illumination of the field still maintaining a complete protection from stray light. Inside the light shields there are also micro baffles that reduces, coupled with an opaque painting of the surfaces, to nearly zero any possible parasite stray light. In some cases and for particular applications, the light shield for the secondary mirror is made using a special layout that maintain the efficiency of the system while reducing the obstruction for the system. The back plate of our telescopes comes standard with a system for adjusting the planarity of the focal plane in order to compensate for any small misalignment in the imaging train, always unwanted and annoying specially on today’s large CCD cameras.
Officina Stellare Veloce RH 250 Astrograph Details...
- Design: Riccardi-Honders
- Primary Mirror (Mangin) Diameter: 225 mm (8.8")
- Front Corrector Lens Diameter: 270mm (10.6")
- OTA Assembly: Closed Tube make of special thermo-compensated material
- Focal Length: 1400mm
- F/Ratio: f/5.6
- Linear Obstruction: 52%
- Fully Corrected & Illuminated Field: 60mm
- Weight: 44 lb.
- OTA Length with Dew Shield Extended: 630 mm
- Back Focus: 200 mm
- RMS Spot Size: Max 3.6 microns at edge of field
- Light Shield: Retractable, made of carbon fiber
Officina Stellare Product Number: VELRH250AT
Customer Notes: Prices subject to change due to fluctuating exchange rates.
Some images may depict fully accessorized telescope. This product number is for optical tube only.
- Additional Information
SKU OF-VELRH250 Manufacturer Officina Stellare Telescope Series Officina Stellare Veloce Optical Design Astrograph Mount Type None - Optical Tube Only Warranty 1 Year Warranty Telescope Aperture 9.9" Telescope Focal Ratio f/5.6 Telescope Focal Length 1400mm Optical Tube Weight 44 lb. Tube Material Full Carbon Athermic Tube Color or Finish Carbon Fiber Finder Included None
- Included Items
- Officina Stellare Veloce RH 250 Riccardi-Honders Astrograph
- Athermic OTA
- Carbon Fiber Light Shield
- Back Tip-Tilt Losmandy Plate
- Second Losmandy Plate
- Pair of Hinged Rings
- Cap Cover
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads
- Related Blog Posts