Officina Stellare Veloce RH 200 - Riccardi-Honders Astrograph Telescope
The Officina Stellare Veloce RH 200 - Riccardi-Honders Astrograph is a premier, innovative, Officina Stellare exclusive! Just check out the primary Mangin mirror optical design, large front full aperture corrector lens and near zero expansion BK7 optical glass for the primary and secondary mirror. It even has two spaced elements for the rear group. We're talking about 200 mm of clear aperture, and an incredible ultra fast, wide field with an F/3 focal ratio and 600mm focal length. Add to that a flat 60 mm diameter field, with 6 micron maximum star spot size.
The materials Officinia Stellare uses in their premium quality telescopes are mostly aluminum and carbon fiber because of their lightness, their mechanical and thermal properties and for the optimal resistance to environmental conditions.
All the mechanical parts for the the OTA are machined using CNC computer assisted machines and from a whole block of aluminum to guarantee the best possible precision. Also the carbon fiber components are produced following strict specification and tolerances. Each part has been computer designed and optimized for the best structural performance, rigidity and lightness. The holding systems for both mirrors, the spider, rings and all the structural components, even the smallest, are CNC machined from a single block of special aluminum (6061/7075, Ergal and Anticorodal), stainless steel, titanium and brass. The tubes are made of true carbon-graphite fiber obtained with the use of high vacuum process, allowing us to obtain the best stability of the focus vs temperature changes still maintaining the best structural rigidity and lightness.
Great care is taken in the making of the rear holding cell of the primary mirror. The entire rear cell for the primary mirror is figured to have the best rigidity/weight ratio and for the fastest possible thermal stabilization between the environment and mirror. The convection and thermal irradiation are greatly improved with the use of three high quality axial fans in the back of the cell.
Great attention has been applied to simplify the collimation between the mirrors resulting in a stable, efficient but easy to use system. The collimation is accomplished by acting on just three points (the minimum required points to generate a single plane) using a special, great diameter preloaded bolts (one for each point). This results in a single hand use, simply turn the bolt left or right to move the mirror back and forth (no more complicated operations using push pull screws and locks) in a very intuitive way. Finding the correct positions is a snap. The mirror borders uses an opaque, circular mask to avoid any undesired light scattering. The light shields for the primary and secondary mirrors are computer designed and optimized to ensure complete illumination of the field still maintaining a complete protection from stray light. Inside the light shields there are also micro baffles that reduces, coupled with an opaque painting of the surfaces, to nearly zero any possible parasite stray light. In some cases and for particular applications, the light shield for the secondary mirror is made using a special layout that maintain the efficiency of the system while reducing the obstruction for the system. The back plate of our telescopes comes standard with a system for adjusting the planarity of the focal plane in order to compensate for any small misalignment in the imaging train, always unwanted and annoying specially on today’s large CCD cameras.
Officina Stellare Veloce RH 200 - Riccardi-Honders Astrograph Mechanical Details
- Special designed OTA materials for stable focus over large temperature range.
- Extremely compact: 235 mm length and 8.4 Kg weight.
- State of art construction: full CNC machined, stainless steel, brass and aluminum parts.
- Includes Officina Stellare manual 72mm FineFocuser & GP Dovetail
- Special thermo compensated material close tube design, unique ed innovative primary cell design, one two-point dovetail and carbon fiber dew shield.
Officina Stellare Product Number: VELRH200
Customer Notes: Prices subject to change due to fluctuating exchange rates.
Some images may depict fully accessorized telescope. This product number is for optical tube only.
- Additional Information
SKU OF-VELRH200 Manufacturer Officina Stellare Telescope Series Officina Stellare Veloce Optical Design Astrograph Mount Type None - Optical Tube Only Warranty 1 Year Warranty Telescope Aperture 7.87" Telescope Focal Ratio f/3 Telescope Focal Length 600mm Optical Coatings Aluminum Optical Tube Weight 17.6 lbs. Limiting Stellar Magnitude 14 Tube Color or Finish Red Finder Included None Focuser Size 72mm (2.83") Manual or Electronic Focusing? Manual
Customer Reviews 1 item(s)
- Veloce RH200
This scope is unbelievable, small enough for easy transport, powerful enough to make other larger scopes look bad and certainly fast enough to bring any object to life, no matter how dim.
This just may be the perfect imaging scope.
1= Houston, We Have a Problem & 5= It's Out of This World
- Included Items
- Officina Stellare Veloce RH 200 - Riccardi-Honders Astrograph
- GP Two-point Dovetail
- Three Fan Primary Mirror Ventilation System
- Retractable Dew Shield
- Dust Caps
- 72mm FineFocus Manual Focuser
- Questions & Answers
Product QuestionsWhat are the options for motorized focusers? Are there any options to readily attach one? how about the use of a rotator if desired? Is there enough backfocus?Question by: geoshare on Jul 7, 2014 5:21:29 AMThere are two options to motorize the included 72mm FInefocus focuser on the Veloce 200RH. If you already have a Robofocus setup for another scope or are willing to purchase the Robofocus control box and cables seperately, the OF-MOTORKIT item includes a Robofocus motor and proper bracket and interface for the 72mm Finefocus for $445. For a complete Officina Stellare solution with their motor, bracket and digital controller, you will want the OF-DIGFFKIT for $1025. Please call us if you would like to add either to your order.
Unfortunately, with only 65mm of available back focus from the retracted focuser, there is not enough room for a rotator on this scope.Answer by: Chris (Admin) on Jul 8, 2014 1:33:20 PM
- Support / Downloads