Orion HDX110 EQ-G GoTo Equatorial Mount
The Orion HDX110 EQ-G equatorial mount offers ultra high precision and a solid frame capable of carrying up to 110 pounds in equipment while still maintaining excellent tracking. +/-3 arcsecond tracking without PEC (Periodic Error Correction). The HDX 110 from Orion provides stability and accuracy for demanding imaging and observing setups. This is a complete set up which includes both the mount head, tripod/pier, counterweights and all electronics.
Featuring robust, observatory-grade electronics which includes high resolution, micro-stepped stepper motors and patented dual-encoder technology which allows both automated operation and manual slewing, without losing the initial GoTo alignment. The alignment is so well maintained that once it has been successfully completed, you can loosen the RA and DEC clutches to reposition the mount with telescope attached and you will still be accurately aligned upon relocking the clutches!
Utilizing Orion's SynScan GoTo controller, the Orion HDX110 can be pointed to anyone of the 42,000 objects in the database with ease. It also allows for a highly accurate polar alignment routine that doesn't require a polar aligning scope - or a view of Polaris. This smart mount also offers permanent periodic error correction (PPEC) to improve on the already excellent PEC. The correction is saved from session to session.
The HDX110 Mount's EQ head features 8.6" (219.5mm) Right Ascension (RA) and Declination (Dec) worm wheels with 435 gear teeth and a thick RA and Dec shaft diameter of 55mm. It's equipped with an autoguider port, ultra smooth latitude jackscrew with a 10°-65° range, precise azimuth adjustment knobs (+/- 10° range from center), SNAP port (for DSLR shutter control), and ON/OFF switch. The mount head itself weighs 55 lbs. and it's equipped with two large handles that make it easy to lift. The 1.25"-diameter stainless steel counterweight shaft threads securely into the mount head. The saddle is a wide, "Losmandy" or "D style" clamp plate with three locking hand knobs.
This model of the HDX110 includes the equatorial mount head, counterweight shaft, GoTo hand controller, tripod/pier and cables. The HDX110 instruction manual includes schematic plans of the mount's baseplate with dimensions for those interested in attaching the HDX110 telescope mount to a permanent pier or a preferred tripod. The Orion HDX110 EQ-G GoTo Mount requires a 12V DC, 4A power supply or field-battery for motorized operation. A 12V DC power cable with auto-lighter plug and threaded connector to the mount is included.
- Additional Information
SKU OR-10011 Head Design Equatorial Tripod or Pier Included? Yes GPS Included? No Electronics Included Computerized - GoTo Manufacturer Orion Warranty 1 Year Warranty Hand Controller Included Orion GoTo Computerized # of Counterweights Included 2 Weight of Counterweights 22.3 lbs. each Tracking Rates Lunar, Sidereal, Solar Objects in Database 42,000+ Saddle Width D Series Weight Capacity 110 lbs. Leg Length 31.10 in. - 43.30 in. Material Steel Power Supply Included None - Requires 12V Battery Tracking Modes EQ North, EQ South Latitude Range 10-65º Weight of Tripod/Monopod 55 lbs. Weight of Head 55 lbs.
- Included Items
- Orion HDX110 EQ-G GoTo Equatorial Mount head
- Orion AZ/EQ Computerized GoTo Hand Controller
- Counterweight shaft, 31.5mm diameter
- Two 22.3 lb. counterweights
- Jackscrew handle for altitude adjustment
- Azimuth adjustment knobs
- 12V DC power cable with auto-lighter plug and threaded mount connector
- RS-232 PC interface serial cable
- Coil cable for GoTo controller
- SNAP cable for select Canon cameras
- Tripod leveling pads (3)
- 19mm combination wrench
- Questions & Answers
Product QuestionsThe Orion HDX110 mount specifies that it has to have a current of at least 4 amps to run. There is an Orion AC-to-2amp-DC power cord listed in your on-line store for this mount as an accessory, but nothing large enough to run the mount. In other on-line stores I saw an Orion AC-to-5amp-DC power adaptor cord available for purchase. Is it possible that Orion has more accessories available to the public than we see in your on-line store? Thanks. BillQuestion by: William Meaney on Oct 31, 2015 12:55:00 PMOrion does make the OR-07299 5-Amp AC to DC adapter, and we do stock them even though they are not shown on the website at the moment. We try to show as much of our inventory on our website as possible, but with new products coming out all the time there is sometimes a lag between when we bring a product in and when it gets posted on the website.Answer by: Chris Hendren (Admin) on Nov 2, 2015 5:46:00 PMYour pictures of this item show a hard case for the mount head, yet a case is not listed under your "included items". Which is it? Is the case included or not?Question by: Old Mac on Dec 1, 2014 12:14:10 AM
- Support / Downloads