Based on a 2.8MP Sony ICX674 monochrome sensor, the QSI 628 offers exceptional sensitivity with a peak QE of over 75%. This sensitivity is paired with wide dynamic range, dual read rates, and low noise. The 628 series is well suited for a wide range of applications including planetary and deep sky imaging. The 628i features an electronic only shutter, for very high frame rates up to 100 microseconds. A slim profile body makes it the most light-weight option in the series, weighing just under 2 pounds.
The QSI 600 Series builds on the foundation of the popular QSI 500 Series. Dual read rates of up to 8 MHz with high-speed USB 2.0 and full 16-bit output allow 600 Series cameras to produce high quality images with high frame rates, extremely wide dynamic range, excellent linearity and exceptionally low noise. Cooling on the 600 Series is achieved with a custom 2-stage TEC supporting regulated cooling to greater than 45C, or greater than 50C with the option Liquid Heat Exchanger.
The superb imaging performance of 600 Series cameras is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgradeability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.
Sony ICX674 Sensor Features
Image Size: diagonal 10.972mm (type 2/3)
Transfer Method: Progressive scan interline transfer.
Total # of Pixels: 2020 x 1476, approximately 2.98M pixels
# of Effective Pixels: 1940x1460, approximately 2.83M pixels
# of Active Pixels: 1932x1452, approximately 2.81M pixels
Unit Cell Size: 4.54 microns square
Optical Blacks: 40 pixels horizontal, 8 pixels vertical per channel
Number of Dummy Bits: 1 per channel horizontal, none vertical
Horizontal Drive Frequency: 54MHz
Package: 68 pin Ceramic PGA
QSI 600 Series Body Design
Small and sleek, the QSI 600 series is nearly small enough to hide behind a CD-ROM. Refined design with precision machined and fit parts, the cameras are also striking in a metallic black and blue finish. With the goal of maintaining as shallow of a depth as well as overall size, the shutter and filter wheel (where included) have been placed very near to the image sensor. This results in minimized backfocus and as compact of a body as function will allow. This reduced design also results in great stability thanks to a shortened moment-arm. The motion control electronics are actually buried in the 0.12" thick shutter/filter mounting plate to reduce depth further. Pulling the cooling fans and heatsinks into the body resulted in another significant reduction in depth. Finally, having all electrical cables and the optional liquid heat exchanger recirculation hoses exit the body in the same direction and perpendicular to the optical axis insured an interference-free fit in tight spaces. Each body is machined out of aircraft-grade aluminum, finely finished with a corrosion resistant anodized finish and stainless steel hardware.
The 628i features the slim body profile which is the most compact and lightweight in the lineup thanks to the electronic shutter only. At just 1 pound 10 ounces and only 1.68" deep, all of the QSI 600 cameras (with the exception of 8 position filter wheel models) are a mere 4.45" square. They are highly compact and portable. Their compact design also ensures that a QSI 600 camera will not weigh your setup down, meaning less counterbalance is required and focusers perform better with less stress.
- Additional Information
SKU QS-628I Manufacturer QSI Color or B&W? Monochrome (B&W) Sensor Type Interline Transfer Series QSI 600 Pixel Size < 5 Microns Chip Diagonal 10.1mm - 12mm Warranty 1 Year Warranty Sensor Manufacturer Sony # of Sensors Single Sensor Sensor Model ICX674 CCD Class Standard Anti-Blooming Sensor? yes Micro-lensing Sensor? yes Quantum Efficiency Peak: 77% at 560nm Pixel Size in Micrometers 4.54 microns square Pixel Array 1940x1460 active Sensor Diagonal 10.972mm Minimum Exposure Time .0001 seconds Maximum Exposure Time 4 hours Integrated Guider? No Binning Modes 1x1, 1 x CCD Height (User Set), 2x2, 3x3, 4x4, 4 x CCD Height (User Set), 5x5, 6x6, 7x7, 8x8, 8 x CCD Height (User Set), 9x9 Focus Distance To Sensor 0.58" w/ T-mount adapter, 0.68" w/ C-mount adapter, 0.35" w/ no adapter Shutter Type Digital Dark Current <0.002 electrons per second at -10°C Filter Wheel No Interface USB 2.0 Operating System Compatibility Windows Camera Cooling Type Thermo-electric Cooling (TEC) Camera Body Dimensions 4.45” x 4.45” x 1.68” Camera Weight 1 lb. 10 oz.
- Included Items
- QSI 628i Camera, Electronic Shutter Only
- T-Mount Camera Adapter
- T-Mount Adapter Cover
- T-Mount to 2" Nosepiece
- 12VDC/ 90-240VAC Power Supply
- 10 ft. USB 2.0 Interface Cable
- 10 ft. Standard Guider Cable
- QSI Installation CDROM
- Drivers for MaximDL/CDC and CCDSoft
- ActiveX Developer's Kit
- Custom Fit Pelican Storage Case
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads