About the QSI 640 CSG Monochrome CCD Camera
The QSI 640csg CCD camera employs a color 4.2 megapixel Kodak (now TrueSense) interline transfer CCD imaging sensor. The KAI-04022C offers a large field of view in cameras using standard 1.25” filters. The sensor uses a vertical overflow drain that provides both anti-blooming protection and a fast electronic shutter. The superb imaging performance of the 640 CSG camera is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgradeability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.The QSI 640csg camera system is supported by industry-leading astronomy and microscopy image acquisition software, and a full camera control API is available for creating custom Windows or Linux applications.
QSI 640csg CCD Camera Highlights
- The QSI 640 camera comes with a TrueSense KAF-04022 one shot color sensor, with 4.2MP, micro lens technology and anti-blooming protection.
- This 640 Series camera comes with the Integrated Guide Port (IGP).
- High speed USB 2.0 with 16-bit output
- Dual read rates of 800kHz and 8MHz with virtually undetectable read noise
- Electronic shutter speeds to 100 microseconds
- Internal, even-illumination mechanical shutter for dark & bias frames
- Intelligent, programmable two stage TEC cooling to 45C below ambient
- ASCOM-compatible Windows COM API
- Linux drivers and API
About the KAI-04022C Imaging Sensor
The QSI 640csg camera employs a Kodak KAI-04022 color interline transfer CCD image sensor with micro-lensing technology. The KAI-04022 has excellent quantum efficiency between 350nm and 1000nm with significant enhancement at the blue end of the spectrum. Low dark current and high pixel charge capacity results in a dynamic range exceeding 74db. With a fast electronic shutter and 8MHz High Speed read mode, the QSI 640csg can produce frame rates of up to 15 frames per second (fps) when reading a Region of Interest (ROI), or 5 fps for low resolution full-frame 16-bit images.
Kodak KAI-04022C Specifications
- CCD Architecture: Interline Transfer
- Micro-lensing: Yes
- Anti-Blooming: Yes - 300x suppression
- Imager Size: 15.15 mm Wide x 15.15 mm High
- Pixel Array: 2048 x 2048 active pixels
- Total Number of Pixels: 4.2 megapixels
- Pixel Size: 7.4µm x 7.4µm
- Quantum Efficiency: Peak: 55% at 500nm
- Pixel Dark Current: <0.1 electron per second at 0°C
- Intrinsic Read Noise: <8 electrons RMS
- Charge Transfer Efficiency: >0.99999
- Dynamic Range: 74db
About QSI Two-Stage TEC Cooling
The QSI 640csg has a very efficient custom 2-stage thermoelectric cooler (TEC) subsystem. Intelligent, programmable cooling fans are integrated into the rear of the camera body to remove the heat generated by the cooler. Typically, forced air cooling lowers the regulated CCD temperature by up to 45°C below ambient utilizing 85% power. Tight +/- 0.1°C temperature regulation is maintained at temperature settings of 10°C below ambient and lower. A slim liquid heat exchanger (sold separately) can be attached to the rear of the camera body to increase the cooling further, up to 55°C below the temperature of the circulating fluid.
The cooled CCD image sensor is positioned in a hermetically sealed environmental chamber and covered with an anti-reflection precision optical window. The sealed chamber is purged with an ultra dry noble gas to increase heat conduction and eliminate the possibility of frost forming inside the chamber. To extend the useful period before re-purging is required, a user-rechargeable micro-sieve desiccant is employed to scavenge water molecules that enter the chamber. It is located behind a sub-micron, gas-permeable membrane to prevent particulate contamination of the CCD chamber.
QSI Integrated Guide Port WSG Upgrade
The QSI 600 Series CSG cameras provides a solution to the problems normally associated with guiding by integrating a Guider Port directly into the camera body. The pick-off prism is designed to sit in front of the filters so that you will always have all the star's light available for guiding.
The large 1/2” square pick-off prism of the integrated guide port is optimally positioned close to the internal filter wheel, supporting the use of guide cameras with large sensors, while preventing any vignetting of the main sensor, even with very fast optical systems. The Integrated Guide Port (IGP) is designed to support any camera with 12.5mm of back focus or less that can be attached using C-mount or T-mount threads.
The threaded adapter sits on top of the focus ring and allows the guide camera to be rotated to any position. The focus ring threads onto the focus base to allow 3mm of travel when focusing the guide camera. Once focus is achieved, the focus ring is locked with a set screw. The guide camera can still be rotated manually if desired without changing the focus. The end result is a rigid, easily focused guide camera that will not move or flex while your mount tracks the apparent motion of the night sky.
- Additional Information
SKU QS-640CSG Manufacturer QSI Color or B&W? Color Sensor Type Interline Transfer Series QSI 600 Pixel Size 7-9 Microns Warranty 1 Year Warranty Sensor Manufacturer Truesense, formerly Kodak # of Sensors Single Sensor Front or Back Illumination Front Illuminated Sensor Model KAI-04022 CCD Class Standard Anti-Blooming Sensor? yes Micro-lensing Sensor? yes Quantum Efficiency 55% at 500nm Pixel Size in Micrometers 7.4um x 7.4um Pixel Array 2048 x 2048 active Integrated Guider? No, but includes Integrated Guide Port Shutter Type Digital & Mechanical Dark Current <0.1 electron per second at 0°C Filter Wheel No Interface USB 2.0 Operating System Compatibility Linux (3rd Party), Windows Camera Cooling Type Liquid Cooled - Optional, Thermo-electric Cooling (TEC)
- Included Items
- QSI 640CSG One Shot Color CCD Camera
- Mechanical Shutter
- Integrated Guide Port
- T-Mount Camera Adapter
- T-Mount Adapter Cover
- T-Mount to 2" Nosepiece
- 12 VDC / 90-240 VAC Power Supply
- 10' USB 2.0 Interface Cable
- 10' Standard Guider Cable
- QSI Software Installation CD ROM
- Drivers for Maxim DL/CCD and CCD Soft
- ActiveX Developer's Toolkit
- Custom Fit Pelican Storage Case
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads