QSI 616s Monochrome CCD Camera - Mechanical Shutter

More Views

QSI 616s Monochrome CCD Camera - Mechanical Shutter
Item # QS-616s
0 Questions(s)

Scheduled Delivery

  • The QSI 616s Monochrome CCD Camera features a Kodak KAF 1603 sensor, mechanical shutter and mid-sized body.
  • USB 2.0 High-Speed, 16-bit output and dual read rates of 800kHz and 8MHz.
  • The QSI 616s Monochrome CCD Camera provides air cooling to 45C below ambient.
  • Incorporates a 2 megapixel monochrome interline transfer CCD with electronic shutter and microlens for high sensitivity..


QSI 616s Monochrome CCD Camera

The QSI 600 Series builds on the foundation of the popular QSI 500 Series. Dual read rates of up to 8 MHz with high-speed USB 2.0 and full 16-bit output allow 600 Series cameras to produce high quality images with high frame rates, extremely wide dynamic range, excellent linearity and exceptionally low noise. Cooling on the 600 Series is achieved with a custom 2-stage TEC supporting regulated cooling to greater than 45C, or greater than 50C with the option Liquid Heat Exchanger.

QSI 600 Series CCD Camera

The QSI 600 Series has seven different models employing a comprehensive range of monochrome and single-shot color scientific grade CCDs up to 8.3mp. A variety of options and accessories are available to meet your specific medical, astronomical or industrial imaging objectives.

The superb imaging performance of 600 Series cameras is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgradeability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.

About The Kodak Full Frame KAF-1603ME Grade 2 Sensor...

The Kodak KAF-1603 Image Sensor is a high performance monochrome area CCD (charge-coupled device) image sensor with 1536H x 1024V photoactive pixels. It is designed for a wide range of image sensing applications in the 350 nm to 1000 nm wavelength band. Low dark current and good charge capacity result in 74 dB dynamic range at room temperature.

Kodak Full Frame KAF-1603ME Grade 2 Sensor

The sensor is built with a true two-phase CCD technology employing a transparent gate. This technology simplifies the support circuits that drive the sensor, reduces the dark current without compromising charge capacity, and significantly increases to optical response compared to traditional front illuminated full frame sensors. Optional microlenses focus the majority of the light through the transparent gate, increasing the optical response further. The photoactive area is 13.8 mm x 9.2 mm. The imager is housed in a 24 pin, 0.88” wide, dual in line package with 0.100” pin spacing.

Kodak Full Frame KAF-1603ME Grade 2 Sensor Features

  • Total Number of Pixels: 1552 (H) x 1032 (V)
  • Number of Active Pixels: 1536 (H) x 1024 (V) = approx. 1.6 M
  • Pixel Size: 9.0 μm (H) x 9.0 μm (V)
  • Active Image Size: 13.8 mm (H) x 9.2 mm (V)
  • Die Size: 15.5mm (H) x 10mm (V)
  • Aspect Ratio: 3:2 - Saturation Signal: 100,000 electrons
  • Output Sensitivity: 10 μV/e
  • Quantum Efficiency (with microlens): Peak: 77% - 400 nm: 45%
  • Quantum Efficiency (no microlens): Peak: 65% - 400nm: 30%
  • Read Noise: 15 electrons
  • Dark Current (T = 25°C): <10pa>
  • Dynamic Range: 74dB - Charge Transfer Efficiency: >0.99999
  • Blooming Suppression: None - Maximum Data Rate: 10 MHz
  • Package: CERDIP Package (sidebrazed) - Cover Glass: Clear or AR coated, 2 sides
QSI Product Number: 616s
Additional Information

Additional Information

SKU QS-616s
Manufacturer QSI
Color or B&W? Monochrome (B&W)
Series QSI 600
Warranty 1 Year Warranty
Full Well Capacity SEE CODE 42 *** SEE CODE 42
Pixel Size in Micrometers SEE CODE 40 *** SEE CODE 40
Pixel Array SEE CODE 41 *** SEE CODE 41
Minimum Exposure Time SEE CODE 44 *** SEE CODE 44
Maximum Exposure Time SEE CODE 44 *** SEE CODE 44
Integrated Guider? No
Dark Current SEE CODE 43 *** SEE CODE 43
Filter Wheel No
Camera Body Dimensions SEE CODE 22 *** SEE CODE 22
Camera Weight SEE CODE 23 *** SEE CODE 23
Included Items

Included Items

  • QSI 616s CCD Monochrome Camera - Kodak KAF 1603
  • Mechanical Shutter
  • T-Mount Camera Adapter
  • T-Mount Adapter Cover
  • T-Mount to 2" Nosepiece
  • 12VDC/90-240VAC Power Supply
  • 10' USB 2.0 Interface Cable
  • 10' Standard Guider Cable
  • QSI Standard Installation CD ROM
  • Active X Developer's Toolkit
  • Custom Fit Pelican Storage Case
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads
Related Blog Posts