FLI Proline CCD Camera
with E2V 4710 Grade 1 Deep Depletion Sensor & 63.5 mm Shutter
About the FLI Proline Camera System
The FLI ProLine Imaging System is the new standard-bearer in CCD camera efficiency and flexibility. As the forerunner of FLI's imaging systems, Proline cameras provide user-defined download rates, cooling base configuration options, and an independent hermetically-sealed chamber for the CCD and electronics. All of the most important elements of the FLI Proline are CNC machined for longevity, even under the most stressful conditions. The ProLine base / heat sink, front flange, and shutter housing are each assembled from a lone fragment of high-grade aluminum. Since the Proline fan cover is also part of the base assembly, it too is CNC machined! Electrical printed circuit boards employ only top-of-the-line components and are shielded from severe atmospheric conditions, removing the need for conformal coatings.
By allowing the user to choose from an array of extremely fast download speeds, the Proline breaks new ground. For focusing, you can download images at 12 megapixels per second, meaning you can download an unbinned image to your PC in as little as as one second! With imaging in mind, the download rate can be decreased to reduce noise in the final image. The Proline will function at -30ºC with ambient temperatures reaching 35ºC (84ºF) for lowest dark current and its attendant noise, thanks to a continuous 55ºC cooling performance. Although additional cooling or cooling sequence is not needed, a liquid cooling option is available if a wider range is desired.
Traditional imaging cameras transfer image data directly from the sensor to the USB port, rendering them exposed to added artifacts due to PC-related concerns such as processing tasks and processor speed. Each FLI Proline CCD camera features internal memory capability, allowing the imaging chip to be read quickly and downloaded to your PC. Because of this, your PC can take the image at its own highest level of proficiency without introducing any unwanted visual anomalies. The Proline image sensor is precisely coordinated so that the imaging chip is perpendicular to the optical path without shims or other post-assembly corrections due to a sophisticated design and refined production methods. This is vital as chips get bigger to guarantee the entire frame of your image is in focus.
About the E2V CCD47-10 Grade 1, Back-Illuminated Deep Depletion Sensor...
This version of the CCD47 family of sensors has full-frame architecture. Back illumination technology, in combination with extremely low noise amplifiers, makes the device well suited to the most demanding scientific applications. To improve the sensitivity further, the CCD is manufactured without anti- blooming structures.
This device has a single serial output register. Separate charge detection circuits are incorporated at each end of the register, which is split so that a line of charge can be transferred to either output, or split between the two.
The register is provided with a drain and control gate along the outer edge of the channel for charge dump purposes. The sensor is made using e2v technologies’ Advanced Inverted Mode process to minimize dark current, allowing the device to be operated with extended integration periods and minimal cooling.
E2V CCD47-10 Sensor Specifications
- Architecture: Full Frame Back Illuminated CCD with square pixels
- Total Number of Active Pixels: 1056 x 1027
- Pixel Size: 13um
- Imager Size: 18.8mm Diagonal
- Full Well Capacity: 100,000 e-
- Video Size: 1.2 inches
- Anti-Blooming: None
- Grade: 1
- Digitization Speed: 750 kHz, 2 MHz (up to 4 MHz available)
- Typical System Noise: 10 e- RMS @ 750 kHz
- Typical Maximum Cooling: 65ºC Below Ambient
- Typical Dark Current: <7 e->
- Non linearity: <1%
- Maximum Readout Frequency: 5 MHz
- Peak Signal: 100 ke-/pixel
- Dynamic Range at 20 kHz: ~50,000:1
- Spectral Range: 200 - 1100 nm
- Readout Noise at 20 kHz: 2.0 e- rms
- Additional Information
SKU FL-PL4710-1-DD Manufacturer FLI Color or B&W? Monochrome (B&W) Sensor Type Full Frame Series FLI Proline Pixel Size > 9 Microns Chip Diagonal 18.1mm - 20mm Warranty 1 Year Warranty Sensor Manufacturer E2V # of Sensors Single Sensor Front or Back Illumination Back Illuminated Sensor Model CCD47-10 CCD Class Class 1 Anti-Blooming Sensor? no Micro-lensing Sensor? no Blue Enhanced Sensor? no Pixel Size in Micrometers 13um x 13um Pixel Array 1056 x 1027 Sensor Diagonal 18.8 mm Integrated Guider? No Shutter Type Mechanical Dark Current <7 e-> Filter Wheel No Interface USB 2.0 Operating System Compatibility Windows Camera Cooling Type Thermo-electric Cooling (TEC) Camera Body Dimensions 6.2 x 6.2 x 3.8 (157.48 x 157.48 x 96.52) Camera Weight 5.6 lb.
- Included Items
- Proline PL4710-1-DD Monochrome CCD Camera
- E2V CCD4710-1-109 Grade 1 Full Frame Sensor with Deep Depletion
- 63.5mm Shutter
- USB Cable
- Custom Power Supply
- Camera Cover
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads
- Related Blog Posts