FLI ProLine PL11002 Monochrome Grade 0 CCD Camera - No Mechanical Shutter

More Views

FLI ProLine PL11002 Monochrome Grade 0 CCD Camera - No Mechanical Shutter
Item # FL-PL11002M-0
0 Questions(s)

Special Order

  • This camera features the Kodak Interline KAI-1102M Grade 0 Sensor.
  • Including fused silica, BK-7, AR coatings, sapphire and others (AR coated quartz windows are standard.)
  • The FLI ProLine CCD Camera is for large format CCDs up to 50mm x 50mm with Interline sensor operation at 12 MHz (16-bit) and Full frame sensor operation up to 10 MHz (16-bit).
  • Video mode setup - Allows the camera to function in near real-time to assist in focusing and centering.
  • The FLI ProLine CCD Camera reaches operating temperatures in 5 minutes!
  • This camera does have a standard electronic shutter however does not include a mechanical shutter. Options for a mechanical shutter and cooling can be found in the Accessories section and in the full description.


FLI Proline Features

The ProLine Imaging System sets a new standard in CCD camera performance and flexibility. As FLI's flagship imaging system, the Proline cameras feature user selectable download speeds, choice of cooling base configurations, and a separate hermetically-sealed chamber for the CCD and electronics. Every major component of the ProLine is CNC machined to ensure a long life in the most demanding conditions. The ProLine base / heat sink, shutter housing and front flange are each machined from a single piece of high-grade aluminium. (Being part of the base assembly, even the ProLine fan cover is CNC machined!) The electrical printed circuit boards use only the highest quality components and are protected from harsh environment without the need for conformal coatings.

Breaking new ground in download speeds, the ProLine provides the user with extremely fast user-selectable download speeds. You can download images at 12 mega-pixels per second for focusing. This means that an unbinned image can be downloaded to your PC in as little as 1 second! For imaging, the download time can be slowed to reduce the noise in the final image. The ProLine achieves a sustainable 65°C cooling performance. This means you can operate your camera at -30°C with ambient temperatures of up to 35°C (84°F) for lowest dark current and its attendant noise. No additional cooling or cooling sequence staging is necessary but a liquid cooling option is available to achieve a wider range.

Conventional imaging cameras move the image data directly from the image sensor to the USB port, making them susceptible to added artifacts due to PC processing tasks, processor speed, and other PC-related issues. Each ProLine camera has an internal memory capacity so that the imaging chip can be quickly read out and downloaded to the PC. This allows the PC to take the image at whatever speed it is capable of without introducing any artifacts to the image. Through sophisticated design and production techniques, the ProLine image sensor is accurately aligned so that the imaging chip is perpendicular to the optical path without shims or other post-assembly adjustments. This is crucially important as chips get larger to insure the entire frame of your image is in focus.

FLI ProLine CCD Camera Feature Overview...

  • The ProLine standard window has the highest transmittance available (~97% to below 390 nm). Systems that require higher transmittance are supplied with windows with extended high transmittance to 180nm.
  • The ProLine shutter avoids the issue of particles falling from the shutter onto the sensor surface.
  • ProLine is setup with external triggering for those applications that require it.
  • The ProLine allows a user to power and connect an FLI focuser and filter wheel directly - avoiding long messy cables.
  • ProLine standard air cooled base provides up to 65 deg C differential.
  • Selectable download speeds up to 12 mega-pixels/seconds and On-board frame buffer standard
  • CCD overscan capability, Field upgradeable firmware and USB 2.0 high speed serial interfaces
  • Triple TEC Cooling for true, maintainable 65ºC cooling and separate hermetically-sealed chambers
  • Electronics and sensor are back filled with medical-grade Argon
  • Low noise, 16-bit operation and High tolerance sensor alignment and orthogonality
  • 100% CNC Machined Sub-Assemblies with High Transmission camera windows (97%) and Custom window available with transmission below 200nm

About The Kodak Interline KAI-11002M Grade 0 Sensor...

The Kodak Interline KAI-11002 Image Sensor is a high-performance 11-million pixel sensor designed for professional digital still camera applications. The 9.0 μm square pixels with microlenses provide high sensitivity and the large full well capacity results in high dynamic range. The two high-speed outputs and binning capabilities allow for 1-3 frames per second (fps) video rate for the progressively scanned images.

The vertical overflow drain structure provides antiblooming protection and enables electronic shuttering for precise exposure control. Other features include low dark current, negligible lag and low smear. When you choose this sensor, you choose to get high resolution, high sensitivity, high dynamic range, low noise architecture, high frame rate, binning capability for higher frame rate and electronic shutter.

FLI Proline Camera Options

  • Anti-Dew Technology (ADT) Option - Available for all Proline cameras with the 63.5mm shutter, so if you want this option on this camera, you will need to purchase the 63.5mm shutter option as well. In most environments, the temperature of camera window will be above the dew point. In some cases dew may form on the outside of the camera window due to the combination of high humidity, ambient temperature and the window temperature. The ADT corrects this problem, allowing for operation in very humid environments.


  • Standard Liquid Cooling Option: For applications that require the ultimate in cooling and/or require heat dissipation to occur away from the camera body.



  • This camera DOES have an electronic shutter and capture images as is, however you can also add a 63.5mm mechanical shutter which is essential for taking true dark frames.


If you would like any of the options listed in the above information, please either click on the links and then add your choices to your shopping cart, or visit the Accessories section to see a full list of options. If you aren't sure which options are best for your set-up, please feel free to contact us by email or phone at 1-800-483-6287 and we will be happy to put together a custom package just for you! Thank you.

FLI Product Number: PL11002M-0

Additional Information

Additional Information

SKU FL-PL11002M-0
Manufacturer FLI
Color or B&W? Monochrome (B&W)
Sensor Type Interline Transfer
Series FLI Proline
Warranty 1 Year Warranty
Sensor Manufacturer Truesense, formerly Kodak
# of Sensors Single Sensor
Front or Back Illumination Front Illuminated
Sensor Model KAI-11002M
CCD Class Class 0
Shutter Type Digital, Mechanical Optional
Filter Wheel No
Included Items

Included Items

  • FLI ProLine Kodak Interline KAI-1102M Grade 0 Sensor CCD Camera
  • Electronic Shutter
  • USB Cable
  • Software
  • Custom Power Supply
  • Camera Cover
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads
Related Blog Posts