ATIK 383L+ Monochrome CCD Camera Package

More Views

ATIK 383L+ Monochrome CCD Camera Package   Discontinued
Item # A3-383L-M-EFW2
  • The Atik 383L+ CCD Camera utililzes a front-illuminated Blue Plus Kodak KAF-8300 sensor.
  • This package also includes the Atik Electronic Filter Wheel which employs 36mm round, unmounted filters in 7 positions
  • The Atik 383L+ CCD Camera delivers highly efficient setpoint cooling to 40 degrees max below ambient.
  • Great software for image acquisition and preprocessing.
  • The Atik 383L+ CCD Camera platform features USB 2.0 interface for fast readout, highly efficient cooling, and low weight.
  • Take stunning wide field images of the sky at high-resolution!
  • The Atik 383L+ CCD Camera gives you a memory buffer to reduce readout artifacts, a high-quality mechanical shutter, case and externally accessible dessicant plugs, too!


Atik 383L+ CCD Camera - Monochrome Kodak KAF-8300 Sensor and Electronic Filter Wheel and Case

Atik 383L+ CCD Camera - Kodak 8300 Monochrome Sensor

The ATIK 383L+, the standard redefined in medium-resolution cooled astronomy cameras...

The new Atik 383L+ is an 8 Megapixel camera using the Kodak KAF-8300 CCD. Over the last few months a huge amount has been written about this CCD, justifying its place in astronomer’s hearts. We can sum it up succinctly by saying it’s a fabulous CCD with a huge number of good-sized pixels that is currently available at an irresistible price. This sensor should redefine mid-range astro-imaging, making multi-megapixel, cooled cameras much more accessible.

So what of ATIK’s implementation? In the past ATIK has prided itself on providing cameras with the very highest image quality but at reasonable cost- we see no reason to change. We have built on the success of our very highly regarded ATIK Platform 3 to support Kodak’s KAF-8300. This immediately offers a huge number of advantages including the very low read-noise circuits and the reliability from using this established design.

Atik 383L+ CCD Camera - Monochrome Kodak KAF-8300 Sensor Features

  • 8.3 Million 5.4μm square pixels for high-resolution imaging
  • Ultra low read-noise for great sensitivity
  • Lightweight - no flexure of the telescope focuser tube
  • Highly efficient setpoint cooling to 40 degrees max below ambient
  • Great software for image acquisition and pre-processing
  • Memory Buffer to reduce readout artifacts
  • High-Quality mechanical shutter
  • Externally accessible dessicant plugs
The highly acclaimed Capture software is included for camera control and data acquisition, and plug-ins are included to allow use with Astroart, CCDSoft, and MaxIm DL.

System requirements: Pentium II PC with 64MB RAM, Windows 98/XP/Vista, CD-ROM drive and USB 2.0 port.

Included Atik Electronic Filter Wheel

We’re pleased to include a new motorized filter wheel, with multiple filter capability. This new wheel employs exchangeable filter disks, allowing for multiple combinations, and has large 54mm openings on both sides. With these features, the Atik EFW2 can easily support sensors up to full frame (35mm) format.

Atik Electronic Filter Wheel

The Atik EFW2 also features a slick design, with a slim and lightweight profile. For example, the distance between any Atik camera and the wheel itself is 0mm, while maintaining the possibility to rotate the camera to any desired position. Total extra backfocus needed will be only 22mm. On the software side, the EFW2 has an ASCOM driver, so that any compliant software can control it. Comes with Artemis Capture software, for easy, simple and efficient operation.

Atik Electronic Filter Wheel Features

  • Closed design eliminates light leaks even in the presence of light-pollution
  • Central support maintains rigidity even when using heavier cameras
  • Magnetic sensors allow precise positioning without the use of LEDs
  • Battery power connector (12V Cigarette lighter cable) and 3m USB cable
  • 36mm - 7 Position Filter Wheel

About the Kodak KAF-8300 Sensor

The Kodak KAF-8300 Image Sensor is a 22.5mm diagonal (Four Thirds Format) high performance color or monochrome full frame CCD (charge-coupled device) image sensor designed for a wide range of image sensing applications including digital imaging.

Kodak KAF-8300 Sensor

Each pixel contains blooming protection by means of a lateral overflow drain thereby preventing image corruption during high light level conditions. For the color version, each of the 5.4μm square pixels are patterned with an RGB mosaic color filter with overlying microlenses for improved color response and reproduction. Several versions of monochrome devices are available with or without microlenses.

Kodak KAF-8300 Imaging Sensor Features

  • High Resolution - High Dynamic Range - Low Noise Architecture
  • Photography, Industrial Imaging and Medical Imaging Applications
  • Quantum Efficiency, color: R(600nm), G(540nm), B(480nm) 33%, 40 %, 33% - Quantum Efficiency, monochrome: Microlens, clear glass (540nm) Microlens, no glass (540nm) Microlens, AR glass (540nm) No Microlens, clear glass (560nm): 54% 60% 56% 37%
  • Dark Signal: < 200 e-/s - Dark Current Doubling Temperature: 5.8 °C - Linear Dynamic Range: 64.4 dB - Linearity Error at 12ºC +/- 10%
  • Active Image Size: 17.96mm (H) x 13.52mm (V) 22.5mm (diagonal) - Aspect Ratio: 4:3
  • Blooming Protection: (1ms integration time) 1000x saturation exposure - Maximum Data Rate: 28 MHz
Atik Product Number: 383L-M-EFW2
Additional Information

Additional Information

SKU A3-383L-M-EFW2
Manufacturer ATIK
Color or B&W? Monochrome (B&W)
Sensor Type Interline Transfer
Series Atik 300
Pixel Size 5-7 Microns
Chip Diagonal 22mm & Up
Warranty 1 Year Warranty
Sensor Manufacturer Truesense, formerly Kodak
# of Sensors Single Sensor
Sensor Model KAF-8300
CCD Class Class 2
Pixel Size in Micrometers 5.4 x 5.4 microns
Pixel Array 3362 x 2504
Sensor Diagonal 22.19mm
Minimum Exposure Time .001 second
Maximum Exposure Time unlimited
Shutter Type Digital & Mechanical
Filter Wheel Yes
Interface USB 2.0
Operating System Compatibility Windows
Included Software ATIK Capture
Camera Cooling Type Thermo-electric Cooling (TEC)
Camera Body Dimensions 4.4" x 4.4" x 3.13"
Included Items

Included Items

  • Atik 383L+ CCD Camera
  • Kodak 8300 Monochrome Sensor
  • Electronic Filter Wheel - 36mm Round Unmounted - 7 Position
  • Quick start guide (printed)
  • CD-ROM with drivers, software and user manual (PDF)
  • 1.8 meter battery power connector (with car lighter plug)
  • 3 meter USB cable
  • 2” adapter
  • Case
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads
Related Blog Posts

You may also be interested in the following product(s)