Optec FocusLynx WiFi Add-On Daughter Board
The Optec FocusLynx WiFi Daughter Board is a small circuit board which can be installed inside an existing Optec FocusLynx Focuser Hub. This product is made so that the user can install it themselves, without the need for a factory retrofit!
The FocusLynx Focuser Hub offers an easy way to simultaneously and independently control up to two Optec or Starlight focusers through a computer, smartphone, or hand control. Each focuser may be plugged into the hub using standard serial cables. The FocusLynx can then be connected to a computer via serial cable, ethernet, or wireless network. In the event you wish to use a wireless network, you would purchase this item, the FocusLynx WiFi Add-On Daughter Board. Once connected, are ready to go! You can simply open up any focuser control program or Optec's proprietary FocusLynx Commander control software, and then control each focuser remotely.
In order to use a remote, wireless focusing scheme, you will need to have the Focuser Hub as part of your system, and in addition, purchase and install this WiFi Daughter Board on the Mother Board within the Focuser Hub box. This kit is easy to install! The top of the Hub box is simply removed, and the Daughter Board plugs into the Mother Board which is already inside. Optec provides a video on their web site which demonstrates how to perform this installation. Note: It's highly recommended that the installer uses a static grounding strap, to prevent ESD (static) damage to the electronic components.
Control your focuser remotely using Optec's proprietary software or your other focuser control program, resident on your computer.
This item's product number is OP-19535.
- Additional Information
SKU OP-19535 Manufacturer Optec Focuser Design Feathertouch Focus Control Motorized Warranty 1 Year Warranty
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads