Astro-Physics 27" Sliding Dovetail Plate

Astro-Physics 27" Sliding Dovetail Plate
Item # AP-SB3627
0 Questions(s)

Waiting List

  • This 27" long male sliding dovetail plate was designed for the Astro-Physics 3600GTO Mount, and attaches to the DOVE3622 22" Saddle Plate (sold separately) for a strong, rigid, and versatile two part mounting system.
  • It's longer design (27" vs 22") better accommodates extra long or side-by-side instruments.
  • The AP SB3627 Dovetail Plate can accommodate a wide range of instruments due to the plethora of mounting holes drilled throughout the entire length of the plate.
  • 3.2" - 3.5", 3.937", 4.5", 4.921", 5.5", 6.875", 7.45" and 8.220" hole spacings are provided. Check out the hole pattern for the SB3627 Dovetail Plate.
  • Width of this plate is 9.9" and weight is 13 lbs.


About the Astro-Physics 27" Sliding Dovetail Plate

This plate is similar to the SB3622, however the additional 5" of length make it a great choice for extra-long instruments or side-by-side configurations.

Hole spacings include 3.2"-3.5", 3.937", 4.5", 4.921", 5.5", 6.875", 7.450" and an 8.220" slot to accommodate an even wider variety of instruments. They are repeated throughout the length of the plate. Suitable instruments include all rings with the Astro-Physics hole pattern, 305mm f3.8 Riccardi-Honders, and large Takahashi instruments.

Achieving a Two-Part Mounting System with 22" Dovetail Saddle Plate

When you combine the Astro-Physics 27" Dovetail Plate with the 22" Dovetail Saddle Plate (DOVE3622, sold separately), you will achieve a massive and sturdy two-part telescope mounting system for your AP 3600GTO mount that provides the convenience of a dovetail with the security of a fixed mounting plate. This two part system was designed by Astro-Physics for strength, rigidity and versatility. The 3600 dovetail system can be set up for tip-in or slide-in of the dovetail sliding bar. Safety slots on the saddle plate coupled with the sliding bar's safety stop will help keep accidents from happening.

For permanent installations, a series of matching through-holes in the saddle and tapped holes in the sliding dovetail plate allow the setup to be bolted into its final position through both plates once adequate balance is achieved. As an added feature, the saddle plate has two cable-routing channels on the eyepiece end, each 2" wide and approximately 0.5" high. These channels allow you to access the large opening at the top of the dec axis to run your cables through the mount. Refer to the cabling section of the manual to see how easy this is. The dovetail plate is drilled on the underside of the eyepiece end so that you can attach a plate that can be customized as a cabling port.

Hole Pattern on 27" Sliding Dovetail SB3627

Additional Information

Additional Information

Manufacturer Astro-Physics
Plate Type Dovetails (Male)
Plate Width Custom
Warranty Limited Warranty
Included Items

Included Items

  • 27" Sliding Dovetail Plate
  • (2) 3/8-16x1/2" Low Profile SHCS
  • (4) 1/4-20x7/8" SHCS for Lock-Down
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads