Parallax Standard Rings for 114mm OD Tubes

Parallax Standard Rings for 114mm OD Tubes
$125.00
Item # PA-114MM
2 Questions(s)

In Stock

  • These Parallax Instruments Telescope Tube Mounting Rings are 114mm outside diameter split tube rings for the Takahashi FS-102 and FSQ-106 and the 4" Unitron. Made of die-cast aluminum, finished in gloss black paint, and lined with felt.

  • To measure the circumference of the tube itself use a long piece of paper (not a yarn tape, please). Square the ends of the paper and mark it. Then measure the length of paper and divide by 3.1416. This will give us an exact tube OD

  • Important Note: To insure proper fit and function, please note which telescope and mount the rings are for in the "Comments" section of the shopping cart. Thanks!

  • Please note that the photograph shows a selection of the Parallax Rings while this product only includes the two rings of the size you order.
Description

Details

Parallax Instruments Standard Telescope Mounting Rings for 114mm OD Tubes

These 95mm outside diameter split tube rings are specifically designed for the Takahashi FS-102 and FSQ-106 and the 4" Unitron. They are made of die-cast aluminum, finished in gloss black paint, and lined with felt. The hinges, no-tool knobs, and hardware are made of stainless steel for long life and easy telescope installation and removal.

The rings are installed onto your mount or mount dovetail plate via a 1/4"-20 thread mounting hole that is drilled and tapped in the flat boss on the bottom of each ring. A similar hole is drilled and tapped on the top boss so that accessories, such as a piggyback camera mount, can be attached.

Parallax Instruments Product Number: 114MM

When you get to your shopping cart, please write what you are going to mount the rings to in the comments section. Most standard rings are in stock, however, certain mounting set-ups may require some custom drilling and thus shipping may take a little longer. Please call us at 1 (800) 483-6287 or email us with any questions. Thanks!

Additional Information

Additional Information

SKU PA-114MM
Manufacturer Parallax
Warranty Not Supplied By Manufacturer
Reviews
Included Items

Included Items

  • Parallax Instruments Standard Telescope Mounting Rings for 114mm OD Tubes
  • Hardware
Questions & Answers

Product Questions

I have a levenhuk telescope strike 115 plus ,would these rings be ok for me. it is 114 mm by 900mm focal I will need 2 if they will fit my telescope THANK YOU
3
What hole pattern is on top and bottom of these rings?

They will go around a 94mm Brandon which has a tube diameter of 108mm per my calipers.
0
Support / Downloads