235mm ID Orion Telescope Tube Rings
This cast-aluminum 235mm ID Orion Telescope Tube Ring set features quick-release, hinged clamp knobs and felt lining. Designed for use with Orion telescope mounts, they fit some other brands of mounts as well. One of the two rings in the set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded 1/4"-20 hole. The piggyback camera adapter can be removed for mounting an adapter plate for a guide scope on top of the tube rings. For use with SkyView Pro or Atlas mounts, you will also need a dovetail mounting plate, #7383 (8" length) or #7385 (13" length).
Set of two telescope tube rings includes mounting bolts and washers. Inside diameter (ID) is listed. Choose the size that matches the outside diameter of your telescope tube.
Outer diameter (OD) of the telescope should match inner diameter (ID) of rings. If OD of the telescope is a little smaller thna ID of the rings, that is OK; you can "shim" inside of rings with extra felt. The column labeled "Rings Fit" can be used as a guide for selecting appropriate rings if you don't know the OD of the telescope. Vixen dovetail plates are compatible with the SkyView Pro mount.
Orion Product Number: 7376
Tube Ring Reference Table Item # Ring Inside Diameter (ID) Rings Fit 7369 76mm/3.0" Observer 70 refractor 7370 90mm/3.5" AstroView/Explorer 90, ShortTube 80, 80mm f/11 OTA 7371 100mm/3.9" AstroView 100, SkyView Pro 100, 80mm ED, 100mm f/6 OTA 7372 116mm/4.6" StarMax, Apex 102, SpaceProbe 3, AstroView 120/120ST, 120mm f/5.0 and f/8.3 OTAs 7373 140mm/5.5" ShortTube 4.5, StarBlast 7374 144mm Apex/StarMax 127, SkyView Pro 127 7375 182mm/7.2" SkyView Pro 6, 6LT, 150mm f/8.0 OTA 7376 235mm/9.25" SkyView Pro 8, Atlas 8, 203mm f/4.9 OTA 7377 298mm/11.7" Atlas 10, 254mm f/4.7 OTA
- Additional Information
SKU OR-7376 Manufacturer Orion Warranty Orion Limited Warranty
- Included Items
- 235mm ID Orion Telescope Tube Rings
- Piggyback Camera Adapter
- Mounting Bolts
- One Year Limited Warranty
- Questions & Answers
- Support / Downloads