Astro-Physics 16" Easy-Balance Dovetail Saddle Plate

More Views

Astro-Physics 16" Easy-Balance Dovetail Saddle Plate
$240.00
Item # AP-DOVELM162
0 Questions(s)

In Stock

  • The Astro-Physics 16" Dovetail Saddle Plate is just the ticket if you have a heavy instrument package you are trying to balance on an AP 900, 1200, 1600, 3600 or Mach1 mount.
  • 8 mounting positions allow you to find the best orientation. Three clamps mean at least two will remain engaged on any 7" or longer Losmandy D Style plate, and that means extra security.
  • Clamping blocks are adjusted by 1" knobs, and grip the dovetail plate firmly, however springs in the blocks deep them open until you tighten them.
  • Check out additional images and mounting suggestions for the DOVELM162.
  • Weight is 3.9 lbs.
Description

Details

Astro-Physics 16" Dovetail Saddle Plate...

This 16" Dovetail Saddle Plate, designed and manufactured by Astro-Physics, is the ultimate in versatility for customers with instrument packages that are difficult to balance in conventional saddle plates.

A total of 8 mounting positions are available on the DOVELM162 to provide a "best possible" orientation for either front-heavy or rear-heavy instrument packages - especially useful for today's heavy imaging instrument packages.

This AP dovetail saddle plate has an inherent 8" (20.3 cm) total offset capability, depending on how you position it on the mount. Due to the addition of a third, center clamp, the Astro-Physics DOVELM162 can now maintain at least two clamps engaged on any Losmandy "D-style" or other "D-style" dovetail plate 7" or longer.

As with all AP dovetail saddle plates, it is very easy to attach dovetail plates. Simply tilt your D-style plate, with the scope attached, into position. Then tighten the knobs. There is no need to struggle as you try to insert the Losmandy plate (with your heavy telescope attached) into the end of the dovetail saddle, as with some dovetail saddle plate designs.

The DOVELM162 features 1" diameter knobs with 3/16" hex sockets. Tightening with an Allen wrench is strongly recommended as this plate will likely be carrying a heavy load. The smaller design of the knobs prevents interference with the Dec motor box when the plate is mounted in the extreme offset position. The smaller knobs also avoid interference when used on the 22" or 27" sliding bar for the 3600GTO (SB3622 or SB3627) in a side-by-side configuration.

The clamping blocks grip your dovetail plate firmly. Springs keep the blocks in an open position until you tighten them. The unique design of the clamping blocks ensures that they remain properly aligned with no need for additional guide pins, and the brass washer on the knob allows firm tightening with no binding.

This plate includes wide recesses to accommodate the safety knobs of the Losmandy D-style plates. It also features multiple machined cutouts on the underside to reduce weight. A #10-32 tapped hole at each end allows for cable stays to be installed for cleaner routing of accessory cables.

Weight is 3.9 lb. (1.8 kg).

Warning: For several years, beginning approximately 2004 until more recently, Celestron delivered their scopes with a dovetail mounting plate that had a different specification. These plates do not anchor securely in the DOVELM162. AP encourages everyone using a plate manufactured by Celestron to test that plate in the DOVELM162 before mounting their telescope, in order to ensure that it can be locked down firmly.

Additional Information

Additional Information

SKU AP-DOVELM162
Manufacturer Astro-Physics
Plate Type Saddles (Female)
Plate Width 4" (D Series)
Warranty Limited Warranty
Reviews
Included Items

Included Items

  • 16" Dovetail Saddle Plate
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads