Astro-Physics 15" Dovetail Saddle Plate…
The 15" version of the AP dovetail plate is suited for the 130 f/8 StarFire EDT, 155 f/7 StarFire EDFS, ARO Maksutovs, Takahashi scopes and other instruments of similar size. The knob assembly features a brass pin with a tapered end to hold your sliding bar firmly without marring the aluminum.
Use with the 15" Sliding Bar (SB1500), or any other brand D Series Dovetail that is long enough (14" should work) .
Applications for AP 15" Dovetail…
As a Mounting Plate:
- 400, 600E, 900,1200,1600 or Mach1GTO German equatorial mounts (all models).
- All Takahashi mounts with the 2-hole mounting pattern (EM-10, Teegul, etc) - use the Q4044 adapter plate.
- GiroDX mount - use the Q4044 adapter plate.
As an Accessory Plate:
Attach to the top of Astro-Physics mounting rings (diameters 5" - 8") or rings from Parallax Instruments that have the Astro-Physics hole patterns (you can request it).
Note, you must also use a mounting plate on the bottom of the rings with the same distance, i.e. the DOVE15, FP1500, 1200RP15, 900RP, FP1800 (only if you use the innermost hole spacing) or the cradle plate of the Astro-Physics 800 mount (prior model). The distance between these pairs of holes is 13.75".
Please note that your telescope rings must be tapped with two 10 - 32 holes spaced 3" apart to accommodate this plate as an accessory plate. Some of our earliest rings were produced before we included this set of holes in our standard hole pattern. To confirm that your rings are appropriately tapped, please refer to the Astro-Physics Mounting Ring Hole Pattern document.
Note also that this plate will not accept Vixen style plates (sliding bars) like the Losmandy V-series. This newer Vixen specification is slightly narrower than the long-established Astro-Physics 15" specification and has a much less angled bevel to the dovetail. This dovetail saddle will not adequately clamp onto the smaller Vixen style plate (sliding bar).
- Additional Information
SKU AP-DOVE15 Manufacturer Astro-Physics Plate Type Saddles (Female) Plate Width 4" (D Series) Warranty Limited Warranty
- Included Items
- 15" Dovetail Saddle Plate
- (4) 1/4-20x1/2" FHSCS [for mounting to 400 or Mach1GTO]
- (4) M6-1.0x16mm FHSCS [for mounting to 600E]
- (4) 1/4-20x5/8" FHSCS [for mouting to 900, 1200 or 1600]
- (4) 10-32x3/4" SHCS [for mounting as Accessory Plate onto A-P rings]
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads