Vixen Universal Plate for Vixen Porta Mount

More Views

Vixen Universal Plate for Vixen Porta Mount
$119.00
Item # VX-38011
OR
  • The Vixen Universal Mounting Plate for Vixen Porta Mount allows you to securely attach binoculars, spotting scopes, telescopes, and other accessories.
  • Dimensions of 7.5 x 4.7 x 0.2" (190 x 120 x 5 mm) WxHxD and weighs only 1.15 lbs (520 g).
  • The Vixen Universal Mounting Plate for Vixen Porta Mount arrangement allows for a huge variety of mounting options and includes two knurled knobs.
Description

Details

Vixen Porta Mount Universal Plate

The Vixen Universal Plate is a must for owners of the Vixen Porta Mount. Just this simple piece of equipment allows you to attach spotting scopes, binoculars, DSLR lenses, or other telescopes right to the existing Porta or Porta II altazimuth mount!

With dimensions of 7.5 x 4.7 x 0.2" (190 x 120 x 5 mm) WxHxD and weighing in at only 1.15 lbs (520 g), you'll find the Vixen Porta Mount Universal Mounting Plate indispensable. If you want to connect the Vixen PortaMount to a camera tripod with 1/4"-20 threaded screw, just pick up the Vixen 3942 camera tripod adapter, too! Be sure to check out the diagram in the "Additional Images and Articles" tab to you left for all the different mounting options!

Vixen Product Number: 38011
Additional Information

Additional Information

SKU VX-38011
Manufacturer Vixen
Reviews

Customer Reviews 1 item(s)

Very versatile item.
Bought this to replace a different, but good, "L" bracket on a Vixen Porta II. This was out of stock when I ordered the mount. This is the best "L" bracket I've ever personally used. The arm and plate come as separate pieces so one has a choice of where to mount the arm to the plate: forward, center, rear and even in and forward on one short side, and in the middle of one long side.. The two 1/4-20 standard are not attached and can be placed in a number of holes and three different slots. They also come with removable locking rings which simply screw onto the locking screws. For the slots, the locking screws will screw into the end of the slot to the unthreaded area of the screw when they will freely slide the length of the slots. The plate also has holes for 3/16" and 1/4 camera/tripod screws. It is large enough to hold good sized scopes. I have a C-6 on it using both locking screws in the outer long slot to attached the dovetail bar to the plate. The ability to use two screws to hold it provides added security.
1= Houston, We Have a Problem & 5= It's Out of This World
Review by HughP / (Posted on 6/25/2014)
Included Items

Included Items

  • Vixen Porta Mount Universal Plate
  • 2 Threaded Knobs
Questions & Answers

Product Questions

I have mounted my Tele Vue TV-101 on the Orion Versa Go III using their L bracket designed for this mount.
The set-up works, but I have been hoping to find a beefier and more versatile L adapter plate .

My questions are: (1) What is the load capacity for this Universal Plate? The Versa Go III itself is supposed
to be able to handle 18 lbs.. My scope with Star Beam red dot finder, an 8X50 finder scope, and 2"star diagonal
with adapter for 1.25 eyepieces totals 13 lbs. (2) Does the dovetail wedge work with the saddle of the Versa Go III?
(3) Is there a retraining screw set into the wedge to prevent the wedge from sliding out of the saddle, as there is in
the Orion L- adapter? (4) Do the 1/4-20 screws have locking tabs?

Thanks for your attention to these questions.
Cordially, Joe R.
-3
Support / Downloads
Related Blog Posts