Astro-Physics 30 lb. Stainless Steel Counterweight - 2.5"

Astro-Physics 30 lb. Stainless Steel Counterweight - 2.5"
Item # AP-30SCWT
0 Questions(s)

In Stock

  • This Astro-Physics stainless steel counterweight is made to fit 2.5" diameter counterweight shafts, including those on AP 3600 mounts.
  • Weight is 30 lbs, diameter is 3.9", and thickness is 2.5".
  • A bronze press-fit sleeve in the center hole prevents marring of the shaft as the weights are adjusted, and the counterweight can be locked in place with a large, recessed knob.


Astro-Physics counterweights are precision machined from 303 stainless steel. A bronze sleeve is press-fit into the center hole to prevent marring of your counterweight shaft as you adjust the position of the counterweights. The weights slip easily onto the counterweight shaft and are secured in position with a large hand knob/brass pin assembly. The brass pin will not mar your shaft.

Keep in mind that you can adjust the position of the weights to counterbalance varying loads. However, the addition of a guidescope, camera or other heavy accessories may necessitate an additional counterweight. If you plan to mount your catadioptric, Newtonian or any other scope on your Astro-Physics mount, figure that you will need a counterweight total equal to approximately 80% of the weight of your tube assembly and accessories.

Astro-Physics 30 lb. Counterweight...

This particular AP counterweight is made to fit a 2.5" diameter shaft, which is standard on the Astro-Physics 3600 mount.

  • The weight of this counterweight is 30 lbs.
  • The diameter is 7.9"
  • The counterweight is 2.5" thick.
Additional Information

Additional Information

Manufacturer Astro-Physics
Weight Range 26 lbs. & Up
Warranty Limited Warranty
Included Items

Included Items

  • One 30 lb. Stainless Steel Counterweight for 2.5" Shafts
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads