ASA Power Supply Unit - 24V - 20A
The ASA Power Supply Unit - 24V - 20A is a rugged industrial-grade switching power supply which is rated at 24VDC at 20A output. This power supply can be used to power the ASA DDM160 Mount or any other mounts or equipment which require 24VDC at less than 20A. This is a top-of-the-line AC to DC regulated power supply built to industrial standards and will withstand long, hard use. It is made by Siemens and is their model SITOP-PSU100M24. This is a modular type switching power supply. The user will need to connect the input AC power at 120VAC single phase, by means of a hard-wired connection. The AC power cord (not supplied with this product) will need bare twisted copper leads at the power supply end, which will be attached via separate screw-down terminal block connectors, provided on the power supply chassis.
This Power Supply Unit - 24V - 20A model NETZG24HUT by ASA is highly recommended by ASA for use with their DDM160 mounts or any other mount equipment requiring regulated 24VDC. This unit is a highly regulated, robust, and reliable industrial grade power supply which will keep your ASA telescope mount operating at its peak performance. This power supply weighs approximately 2.65lbs (1.2kg) and has a mechanical enclosure form factor which is snap-in compatible with a DIN Rail EN60715. This employs a DIN-standard top hat rail which is 35mm high and 7.5mm deep. This Power Supply Unit - 24V - 20A model NETZG24HUT can be snapped onto this standard rail and supported within an equipment rack or other suitable enclosure. Alternatively, the Power Supply Unit can be placed down on a flat solid surface, as long as its ventilation grilles are not blocked during operation. It requires natural convection for cooling.
Customer Warning: Because this power supply unit uses screw-down terminal block connectors, which are exposed on the outside of the chassis, the user must be aware that under certain circumstances, the input 120VAC power may be exposed. A person could accidently come into contact with this dangerous voltage! If this power supply is not installed inside a closed rack or cabinet, and thus is exposed, the user has the responsibility of protecting other persons (any children, in particular) from accidently contacting this 120VAC power at the terminals, which could result in a harmful or lethal shock.
Some Specifications for the NETZG24HUT Power Supply by ASA
- Input: 120 - 230VAC, 1-phase, 50 - 60Hz (for USA power)
- Output Voltage: 24VDC, Regulated, Total Tolerance = 3 percent
- Output Voltage Adjustment: 24 - 28.8VDC, via potentiometer
- Output Current: 0 - 20A
- Output Power Rating: 480W, typical
- Input Fuse: Yes, input fuse built-in
- Operating Temp: -25°C to +70°C, Operating with natural convection
- Protected Output: Yes - Overload and Crowbar protection incorporated
- Status Display LED: Yes - 3
- Chassis-Case: All metal case construction; Snap-in Rail compatible with a DIN Rail EN60715
- Case Dims: Height = 125mm; Width = 90mm; Depth = 125mm
- Weight: 2.65lbs (1.2kg) approx.
Customer Note: This ASA Power Supply Unit - 24V - 20A is a Special Order item, and it will ship from Austria.
- Additional Information
SKU A2-NETZG24HUT Manufacturer ASA Warranty 2 Year Warranty
- Included Items
- ASA Power Supply Unit - Modular - 24V - 20A
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads