Lunt Solar Systems - 100mm H-Alpha Etalon
Are you ready to use the double-stack technique to reduce bandpass and get the best possible resolution and contrast from your Lunt Solar System telescope? Then check into the Lunt 100mm H-alpha Etalon. This 100mm aperture filter will reduce the bandpass of a Lunt LS-100 solar system to <0.5 - dependent slightly on the telescope. What's more, if you order this extra Etalon at the same time you purchase your LS-100, the two filters will be matched at the factory. If you already have an LS-100 and want to double-stack, please contact OPT
for instructions that will ensure your current Etalon and your new Etalon match up properly.
Lunt Solar Systems creates their line of h-alpha solar telescopes and h-apha accessories in Tuscon, Arizona. They have have put together a group of experienced solar enthusiasts who are looking forward to energizing the hobby with a continued commitment to advancing technologies, pride in quality, and the highest level of customer care. These are names you'll recognize, including Andrew Lunt with 20 years of optical design, Markus Ludes with his extensive knowledge of telescope design, Manny Serrano as a design engineer and Brian Stevens assembling, repairing and troubleshooting etalon systems.
Please Note: This 100mm Filter cannot be used alone for solar viewing or imaging. It only works when attached to an existing Lunt LS100 Solar System, and the proper blocking filter is used. Blocking filter is not included.
Lunt Product Number: 100FHA