DayStar 90mm Clear Aperture Energy Rejection Filter

DayStar 90mm Clear Aperture Energy Rejection Filter
Item # DF-ERF-90
0 Questions(s)

Custom Order

Back to School Savings Ends 8/15!
  • The DayStar Energy Rejection Filter (ERF) has a clear aperture of 90mm.
  • Custom-designed to cover the front objective of your particular telescope model using rear-mounted T-Scanners or Quantum H-alpha filters from DayStar.
  • The DayStar Energy Rejection Filter reduces the heat load on your filter assembly.
  • Transmits light in the desired visual spectrum and can also serve as an aperture mask. Includes cap.
  • When ordering this energy rejection filter, we will need to know the diameter of the front edge of your telescope OTA. If you see your scope listed below, then just state the make and model, as DayStar will already have the specifications necessary. If you have any questions about choosing an ERF for your filter and telescope combination, please email OPT or give us a call at 1-800-483-6287 and we will be glad to help.


DayStar Filters - DayStar 90mm Energy Rejection Filter (ERF)

A DayStar ERF, or energy rejection filter, has its rule. First and foremost, the DayStar Energy Rejection Filter must cover the front objective of any telescope using rear-mounted DayStar T-Scanners or Quantum H-alpha filters. They are "telescope specific" designed"!

DayStar Solar Energy Rejection Filter

What makes a DayStar Energy Rejection Filter work? ERF's reduce the heat load on your filter assembly by absorbing or reflecting ultra-violet and/or infra-red light and transmitting light in the desired visual spectrum. These filters are sometimes red or yellow optical glass, or dielectric IR and UV, but pass the light through in the desired visual spectrum. The DayStar ERF can also serve as an aperture mask to accomplish a straight angle of incidence for light entering the filter.

Because they are a speciality item, DayStar Energy Rejection Filter assemblies operate best at focal ratio of f/30 and slower. Creating an f/30 configuration can be done easily with the proper DayStar ERF and/or a barlow lens. Higher resolution, larger aperture configurations (such as full or half aperture) use a barlow lens, which is sold separately. In order to compute the proper aperture reduction mask, divide your telescope EFL or Focal Length by 30. To compute the proper aperture using a barlow, use the adjusted EFL which includes multiplication by your barlow.

Choosing a DayStar Energy Rejection Filter

All DayStar Energy Rejection Filters are priced by clear aperture, and include the chosen aperture glass, a cell to fit the diameter of your telescope OTA, and a telescope end cap.

Here is a list of common telescopes that can use a 90mm DayStar ERF in either full, half, or reduced configurations:
  • Meade ETX 90 - Full with 2X Powermate
  • 3.5" Questar - Full with 2X Powermate
  • Celestron 11" SCT - Reduced
  • Takahashi Mewlon 250 - Reduced
  • Takahashi Mewlon 300 - Reduced
  • Takahashi FRC 300 - Reduced
  • Konus 90mm Mak - Full with 2X or 2.5X Powermate
  • Bushnell 90mm NorthStar - Full with 2X Powermate
  • AP 92mm f/7 Stowaway - Full with 4X Powermate
  • AP 130mm f/6 Starfire - Full with 4X Powermate
  • Tele Vue NP 127 - Full with 4X Powermate
  • Celestron 90mm f/12.3 Astromaster - Full with 2.5X Powermate
  • Borg 101 f/6.3 - Full with 4X Powermate
Remember, you are not done ordering your ERF until you have specified the telescope you plan to use with your DayStar Quantum or T-Scanner (rear mounted) filter. If the telescope is listed above, the make and model (i.e. Meade 8" LX200-ACF) is sufficient. However, if you do not see your telescope listed here, please give the make and model as well as the front edge diameter of the OTA. Put this information in the "comments" section of your shopping cart when ordering. If we need more information, we will contact you.

DayStar Product Number: ERF-90
Additional Information

Additional Information

Manufacturer DayStar
Solar Accessory Type Filters
Warranty 10 Year Warranty
Included Items

Included Items

  • DayStar 90mm Energy Rejection Filter
  • Custom Filter Cell
  • Telescope End Cap
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads
Related Blog Posts