Pier-Tech Tri-Pier 1 Custom Telescope Pier - 48" to 60" Minimum Height (O)

Pier-Tech Tri-Pier 1 Custom Telescope Pier - 48" to 60" Minimum Height (O)
$1,600.00
Item # PT-TP4860
0 Questions(s)

Custom Order

OR
  • The Pier Tech Tri-Pier 1 Portable Telescope Pier combines the stability of a pier with the portability of a tripod!
  • Comes with standard flat top adapter plate, which fits most common mounts. If your mount requires a custom plate, an additional fee will be charged. *See below for more information.
  • The Pier Tech Tri-Pier 1 Portable Telescope Pier holds up to 600 pounds.
  • Choose the minimum height you require (between 48" to 60"), and Pier-Tech will customize the pier for you!
  • Use as a portable pier or permanently mount the Pier Tech Tri-Pier 1 Portable Telescope Pier with optional anchor plate.
  • A 50% deposit is required. OPT will charge your card for that amount upon receipt of your order. The balance due will be required before shipment. Normal wait is 5-6 weeks. Computed shipping costs are based on an "average" delivery. Actual charges may be higher (or even lower!). You will be contacted should charges differ from your shopping cart total.
Description

Details

Pier Tech Tri-Pier 1 Portable Telescope Pier

The Tri-Pier1 can be converted to a permanent height adjustable pier by removing adjustment feet from legs. No need to remove the legs. Just fold them in. So if an observatory is in your future or if you are looking for a pier that can be used both in an observatory permanent setting and at your favorite star party, then the Tri-Pier1 is the pier that will adapt to your needs.  The Tri-Pier1has a gas assisted leg opening. This feature aids in opening the legs and allows the legs to open to the same position, so if you place it in the same place and in the same orientation, on your viewing platform, you won’t have to re-level the pier.

Pier Tech Tri-Pier 1 Portable Telescope Pier Features

  • 600 pound capacity.
  • The pier height is customized to your application. Minimum height is manually adjustable to +10 inches by moving legs down. See Table Below.
  • Aluminum anodized construction for corrosion resistance.
  • Bull’s-eye level is recessed in bottom ring. This feature aids in leveling the pier.
  • Carry Handle
  • Special slots in side of pier allow you to hide wires by adding our slot covers.
  • 3" diameter vibration resistant foot pads for maximum ground contact.

*The price shown includes a flat top adapter plate. If your mount will not accept the standard adapter plate, there will be an additional charge for creating an adapter plate that will fit. OPT will contact you after you place your order if this is the case with your mount. Please include the make and model of your mount in the comments section of your shopping cart to help expedite your order or email OPT for more information.

Pier Tech Product Number: TP4860

Customer Note: It is important that you include the minimum pier height you require in the comments section of our shopping cart, as well as the telescope (or mount) you will be using on the Tri-Pier, so that a custom top plate can be manufactured for you.

Below you will find a table that shows the manual height adjustment range for piers of stated minimum heights. Piers marked with an asterisk cost extra. If you need one of these piers, please add the 30" - 46" model to your shopping cart instead.

TRI-PIER 1 HEIGHT ADJUSTMENT
MINIMUM HEIGHT (HEIGHT ORDERED) MANUALLY ADJUSTABLE TO
30" 40"
32" 42"
34" 44"
36" 46"
38" 48"
40" 50"
42" 52"
44" 54"
46" 56"
48*" 58"
50"* 60"
52"* 62"
54"* 64"
56"* 66"
58"* 68"
60"* 70"

 

Additional Information

Additional Information

SKU PT-TP4860
Manufacturer Pier-Tech
Reviews
Included Items

Included Items

  • Tri-Pier 1 with a minimum height of between 48" & 60" (please indicate in comments section of shopping cart)
  • Built-in bubble level
  • Carry handle
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads
Related Blog Posts