Shelyak Occultation Kit - CCIR Format

Shelyak Occultation Kit - CCIR Format
$1,749.00
Item # SL-PF0030
0 Questions(s)

Special Order

  • Record occultations and other passing celestial events and add a time stamp to your video with this Shelyak Occultation Kit!
  • The Occultation Kit includes a Watec 910HX-RC CCIR (European) monochrome video camera. It is well adapted for astronomical use with low light sensitivity and long exposure abilities.
  • Made especially for members of the International Occultation Timing Association, the IOTA Video Time Inserter works with GPS to provide you with a super accurate time stamp on your important videos.
  • You will also receive two power supplies (one for the camera and one for the VTI), cables, a BNC/RCA adapter, a C mount to 1.25" adapter, and an aluminum case.
  • The Shelyak Occultation Kit is currently available in CCIR format only.
Description

Details

Shelyak Occultation Kit
with Watec 910HX-RC, Video Time Inserter & Accessories

Capture and record, not only the image, but the exact time, when you put the Shelyak Occultation Kit to work on documenting occultations and other events where recording the time is of utmost importance. Here is a list of contents for the Shelyak Occultation Kit:

  • Record astronomical events with the Watec 910HX/RC CCIR video camera
  • Record the time, provided by an internal GPS system, with the IOTA VTI Video Time Inserter
  • Mount the Watec to your telescope with the included C-mount to 1.25” adapter
  • Power the camera and the VTI with two 12V 3A power supplies
  • Connect the camera to your PC’s USB2 port with the USB2 Video Grabber
  • You will also receive a 5m BNC video cable, BNC/RCA adapters, and an aluminum carry case.

About the Watec 910HX-RC CCIR Video Camera

Watec added a remote control unit to their WAT-910HX super low sensitivity monochrome camera, making it even easier (and more fun!) to guide, calculate astronomical event timing & occultations, or when you want to build an electronic finder. The remote control allows you to access the entire on screen display (OSD) by using the mini control paddle.

The Watec 910HX-RC camera is designed to make adjustments based on your lighting conditions via frame loss compensation, and uses integrated frame technology to achieve a low sensitivity of 0.000005LUX. Pre-calibration can be accomplished by the user to ensure the highest quality results.

Watec 910HX/RC CCIR Camera Specifications

  • Pick Up Element: 1/2” interline transfer CCD image sensor
  • Total Pixels: 795 x 596
  • Effective Pixels: 752 x 582
  • Pixel Size: 8.6um x 8.3um
  • Sync System: Internal
  • Scanning System: 2:1 interlace
  • Video Output: Composite Video, 1.0 V(p-p), 75Ω (Unbalanced)
  • Resolution (H): More than 570TVL (Center)
  • Minimum Illumination: 0.000005lx. F1.4 (Shutter: x256, AGC: HIGH, γ: 0.35)
  • S/N: More than 52dB (AGC=6dB, γ=1.0)
  • Function Settings: OSD operated by remote control
  • Electronic Iris: 1/50-1/100000 sec., x256(field) *selectable -1/100000 sec.
  • Electronic Shutter: 1/50, 1/120 sec., 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000 sec.
  • AGC ON: LO: 6~30dB / MID: 6~34.5dB / HI: 6~41dB
  • AGC OFF: 6-41dB (1dB step) *selectable
  • Gamma Characteristics: γ≒0.05-1.00 (0.05 step), USER *selectable
  • Noise Reduction: 3DNR ON *selectable / OFF
  • Wide Dynamic Range: USER1/USER2/OFF
  • Motion Detection: Max. 4 areas selectable (Out-put terminal available)
  • Lens-Iris: Video / DC (EIAJ arrangement, Auto-select)
  • Back Light Compensation: OFF/BLC/HSBLC
  • White Blemish Correction: Up to 64 dots correctable by OSD operation
  • Power Consumption: 1.38W (115mA)
  • Power Supply: Not Included, requires DC+12V+/-10%
  • Operating Temperature: -10 - +50ºC
  • Operating Humidity: Less than 95% RH without condensation
  • Storage Temperature: -30 - +70ºC
  • Storage Humidity: Less than 95% RH without condensation
  • Lens Mount: CS-Mount (Back Focus Adjustable)
  • Size: 1.4”(W) × 1.4”(H) × 2.5”(D)
  • Weight: Approximately 2.93 ounces (83g)

About the IOTA Video Time Inserter (CCIR)

The Video Time Inserter was developed for members of the International Occultation Timing Association. It works well for any video timing application, but since it was built specifically for the IOTA, the features of the VTI are especially suited for those who wish to video record occultations. Please note that this model of the VTI is compatible with European video format (CCIR/PAL, at 25 frames per second) cameras, such as the Watec 910HX-RC included in this occultation kit.

Set Up

It is fast and easy to set up the VTI. All you need are three cables, which are included in the kit. The Video Time Inserter is very accurate, since it gets its information via GPS. It may take a few minutes to acquire a GPS signal at first, but it should take less time in subsequent sessions. There are three indicator lights on the unit that display its status. If you want to attach the VTI unit to a tripod, there is a 1/4-20 threaded hole in the base.

About the USB2 Video Grabber

Connect your Watec 910HX-RC video camera to your PC through your USB2 port. The Shelyak USB2 Video Grabber supports USB 2.0 and is very compact. It is compatible with Windows 2000, XP, Vista, and 7, although you must do a manual driver set up if you use Windows 7.

USB2 Specifications

  • USB 2.0 (480Mbit/s)
  • Non compatible with USB 1.1
  • Video up to 25 images per second in 720 x 576 pixel (PAL), 30 images per second in 720 x 480 pixels (NTSC)
  • Audio via USB (Windows XP/Vista) or sound card (Windows 2000)
  • Video In: composite video (Cinch/RCA ) or S-Video (S-VHS)
  • Audio In: stereo (Cinch/RCA)
  • Support NTSC and PAL
  • Consumption: 5V, 300mA (max.) via port USB
  • Length: 26cm

PC Minimum Requirements

  • Computer with interface USB 2.0 (NOT USB 1.1)
  • Processor Pentium P3 800MHz
  • 256MB RAM
  • Hard drive with 4GB capacity
  • Windows XP (SP1) or Windows 2000 (SP3)
  • Sound card

Other Accessories Included with the Occultation Kit

The Occultation Kit comes with two 12V, 3A power supplies; one for your Watec camera and one for the Video Time Inserter. The connector is 2.5*5.5mm. These power supplies also work with many of the Shelyak spectrographs, just check the specs to make sure before plugging it in.

The Occultation Kit also comes with a C Mount to 1.25" (31.75 mm) Adapter. With this adapter you can attach the Watec camera, or any camera with a C-mount, to the 1.25" eyepiece holder of your telescope. It also works great to attach the camera to the Lhires III spectrograph guiding port.

Finally, you will receive a 5m BNC video cable, a BNC/RCA adapter, and an aluminum case to carry everything in.

Additional Information

Additional Information

SKU SL-PF0030
Manufacturer Shelyak
Series Watec
Color or B&W? Monochrome (B&W)
Warranty 1 Year Warranty
Video System CCIR (Mono, Europe)
Pixel Size in Micrometers 8.6um x 8.3um
Pixel Array 795 x 596
Minimum Exposure Time 1/100,000 sec.
Maximum Exposure Time 1/50 sec.
Shutter Type Rolling Electronic
Filter Wheel No
Camera Body Dimensions 1.4" x 1.4" x 2.5"
Camera Weight 2.93 ounces
Reviews
Included Items

Included Items

  • Watec 910HX-RC CCIR Camera - Monochrome
  • RC-01 Controller
  • Lens Mount Cap
  • RC Plug
  • Iris Connector
  • Cable (300 mm)
  • Hex Wrench
  • C to 1.25" Adapter
  • IOTA Video Time Inserter
  • Two 12V Power Supplies (camera and VTI)
  • USB2 video grabber
  • 5m BNC video cables
  • BNC/RCA adapters
  • Carrying Case
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads