Starlight Xpress Trius SX-35 Details
A big camera in a tiny body the Trius SX-35 and 36 offer the largest sensors in the Trius lineup. A Truesense (Kodak) KAI11002M imaging sensor is housed in a 4 inch round, 4 inch long body. Sporting 9 micron square pixels, set in a huge 36.3 x 24.2mm array, this ultra-sensitive sensor is capable of capturing large deep sky objects in a beautiful high resolution. Low dark signal eliminates the need for dark frames when capturing brighter deep sky objects. Anti-blooming technology enhances sharpness and minimizes post processing times.
Focusing on smart design, Starlight Xpress has packed a USB hub into this small camera offering three separate USB connections to power your various accessories like color filter wheels and guiders. By connecting directly to your camera, you'll need only one computer to control everything! A single USB control cable eliminates yards of cables that would otherwise be a tangle. USB 2.0 connections offer super fast, 7 second download times. The Trius SX is a model of power conservation too, sipping less than 1.5 amps at 12v DC - 18VA at 110v or 240v AC. 72 x 1mm input thread make this camera directly compatible to the Takahashi FSQ106 and easily adapted to a wide array of telescopes.
- CCD type: Truesense KAI11002M interline CCD with low dark current and vertical anti-blooming.
- CCD Full resolution Pixel data: Pixel size: 9uM x 9uM, Image format: 4032 x 2688 pixels
- CCD Image area: 36.3mm (Horizontal) x 24.2mm (Vertical).
- CCD quality: Grade 2 as standard.
- Spectral Response: QE max at 540nM (~51%), 30% at 400nM and 660nM.
- Readout Noise: Less than 15 electrons RMS - typically only 12 electrons.
- Full-well capacity: Greater than 50,000 e- (unbinned)
- Anti-blooming: Overload margin greater than 1000x.
- Dark current: Dark frame saturation time greater than 10 hours. Less than 0.08 electrons/second @ -20C CCD temperature.
- Data format: 16 bits.
- System gain: 0.9 electrons per ADU
- Computer Interface: Built-in USB 2.0 compatible interface.
- Image download time: Typically 7 seconds at full resolution using USB 2.0.
- Power requirements: 115VAC / 240VAC @ 12VA, or 12VDC @ 1.5A max.
- Cooling system: Regulated constant current cooling supply with three stage thermoelectric cooler to give a CCD temperature of approximately -37C below ambient.
- Size: 98 x 100mm black anodised aluminium barrel with 72 x 1mm thread at the CCD window end & input/output plugs at rear. CCD alignment screws are provided for setting the chip parallel to the focal plane.
- Weight: approx. 810g.
- Additional Information
SKU SX-SX-35 Manufacturer Starlight Xpress Color or B&W? Monochrome (B&W) Sensor Type Interline Transfer Series Starlight Xpress Trius SX Pixel Size 7-9 Microns Chip Diagonal 22mm & Up Warranty 1 Year Warranty Sensor Manufacturer Truesense, formerly Kodak # of Sensors Single Sensor Sensor Model KAI-11002M CCD Class Class 2 Anti-Blooming Sensor? yes Full Well Capacity Greater than 50,000 e- (unbinned) Pixel Size in Micrometers 9 microns square Pixel Array 4032 x 2688 pixels Sensor Diagonal 43.6272mm Integrated Guider? No Focus Distance To Sensor 17mm +/-1mm Shutter Type Digital Dark Current Dark frame saturation time greater than 10 hours. Less than 0.08 electrons/second @ -20C CCD temperature. Filter Wheel No Interface USB 2.0 Operating System Compatibility Windows Camera Cooling Type Thermo-electric Cooling (TEC) Camera Body Dimensions 4.64" x 4.02" Camera Weight 1 lb. 12.5 oz.
- Questions & Answers
Product QuestionsHow do you take dark frames with an interline (progressive sensor) if there is no mechanical shutter? Is this possible with the electronic shutter or do you have to cover the telescope aperture?Question by: MikeM on Jan 13, 2015 7:57:11 AMWithout a physical shutter, you would need to cover the camera or scope to shoot dark frames. This is not as much of a chore as it sounds, as with the SX-35 you can control the temperature so that darks shot on one night can be used on future nights as long as you use the same temperature set point.
Another option is to replace one of the filters in the filter wheel with a "dark" filter from Astronomik (in both 2" and 50mm size) and rotate this filter into position whenever you want to shoot a dark.
Please contact us if you have any questions.Answer by: Chris (Admin) on Jan 13, 2015 9:40:12 AM
- Support / Downloads