QSI 628WS Monochrome CCD Camera w/ 8-Position CFW

QSI 628WS Monochrome CCD Camera w/ 8-Position CFW
$3,590.00
Item # QS-628WS-8
0 Questions(s)

Special Order

OR
  • QSI 628ws is built on the Sony ICX674 monochrome sensor and feature high sensitivity with peak QE of over 75%.
  • Frame rates up to 100 microseconds.
  • Dual read rates of 800kHz and 8MHz.
  • USB 2.0 16-bit high speed output.
  • Includes a 5 position, built-in filter wheel.
  • Superior design, the full body enclosure allows perfect function without sacrificing a compact, sleek body.
  • Note: If you will be using 31mm unmounted filters with this camera, you will require part number QS-AC5-CFW31-S3 which is specialized mounting hardware to ensure that your filters are secure. This can be found in the Recommended Accessories to your right.
Description

Details

Based on a 2.8MP Sony ICX674 monochrome sensor, the QSI 628 offers exceptional sensitivity with a peak QE of over 75%. This sensitivity is paired with wide dynamic range, dual read rates, and low noise.  The 628 series is well suited for a wide range of applications including planetary and deep sky imaging.   The 628i features an electronic only shutter, for very high frame rates up to 100 microseconds.

The QSI 600 Series builds on the foundation of the popular QSI 500 Series. Dual read rates of up to 8 MHz with high-speed USB 2.0 and full 16-bit output allow 600 Series cameras to produce high quality images with high frame rates, extremely wide dynamic range, excellent linearity and exceptionally low noise. Cooling on the 600 Series is achieved with a custom 2-stage TEC supporting regulated cooling to greater than 45C, or greater than 50C with the option Liquid Heat Exchanger.

The superb imaging performance of 600 Series cameras is wrapped in an attractive, compact design with outstanding power efficiency and investment protecting upgradeability. The refined engineering and impressive fit, finish and attention to detail will surpass your highest expectations.

 

Sony ICX674 Sensor Features

Image Size: diagonal 10.972mm (type 2/3)

Transfer Method: Progressive scan interline transfer.

Total # of Pixels: 2020 x 1476, approximately 2.98M pixels

# of Effective Pixels: 1940x1460, approximately 2.83M pixels

# of Active Pixels: 1932x1452, approximately 2.81M pixels

Unit Cell Size: 4.54 microns square

Optical Blacks: 40 pixels horizontal, 8 pixels vertical per channel

Number of Dummy Bits:  1 per channel horizontal, none vertical

Horizontal Drive Frequency:  54MHz

Package: 68 pin Ceramic PGA

 

QSI 600 Series Body Design

Small and sleek, the QSI 600 series is nearly small enough to hide behind a CD-ROM.  Refined design with precision machined and fit parts, the cameras are also striking in a metallic black and blue finish.  With the goal of maintaining as shallow of a depth as well as overall size, the shutter and filter wheel (where included) have been placed very near to the image sensor.  This results in minimized backfocus and as compact of a body as function will allow.  This reduced design also results in great stability thanks to a shortened moment-arm.  The motion control electronics are actually buried in the 0.12" thick shutter/filter mounting plate to reduce depth further. Pulling the cooling fans and heatsinks into the body resulted in another significant reduction in depth. Finally, having all electrical cables and the optional liquid heat exchanger recirculation hoses exit the body in the same direction and perpendicular to the optical axis insured an interference-free fit in tight spaces.   Each body is machined out of aircraft-grade aluminum, finely finished with a corrosion resistant anodized finish and stainless steel hardware.

The 628s features the full body enclosure.  At just 2 pounds 8 ounches and only 2.5" deep, and slightly larger than it's counterparts at 5.86”x5.56”.  They are highly compact and portable. Their compact design also ensures that a QSI 600 camera will not weigh your setup down, meaning less counterbalance is required and focusers perform better with less stress.

Additional Information

Additional Information

SKU QS-628WS-8
Manufacturer QSI
Color or B&W? Monochrome (B&W)
Sensor Type Interline Transfer
Series QSI 600
Pixel Size < 5 Microns
Chip Diagonal 10.1mm - 12mm
Warranty 1 Year Warranty
Sensor Manufacturer Sony
# of Sensors Single Sensor
Sensor Model ICX674
CCD Class Standard
Anti-Blooming Sensor? yes
Micro-lensing Sensor? yes
Quantum Efficiency Peak: 77% at 560nm
Pixel Size in Micrometers 4.54 microns square
Pixel Array 1940x1460 active
Sensor Diagonal 10.972mm
Minimum Exposure Time .0001 seconds
Maximum Exposure Time 4 hours
Integrated Guider? No
Binning Modes 1x1, 1 x CCD Height (User Set), 2x2, 3x3, 4x4, 4 x CCD Height (User Set), 5x5, 6x6, 7x7, 8x8, 8 x CCD Height (User Set), 9x9
Focus Distance To Sensor 1.40" w/ T-mount adapter, 1.18" w/ C-mount adapter, 1.18" w/ no adapter
Shutter Type Digital & Mechanical
Dark Current <0.002 electrons per second at -10°C
Filter Wheel Yes
Interface USB 2.0
Operating System Compatibility Windows
Camera Cooling Type Thermo-electric Cooling (TEC)
Camera Body Dimensions 5.86”x5.56”x2.50”
Camera Weight 2 lbs. 8 oz.
Reviews
Included Items

Included Items

  • QSI 628 Camera with Mechanical Shutter
  • 8 Position Filter Wheel
  • T-Mount Camera Adapter
  • T-Mount Adapter Cover
  • T-Mount to 2" Nosepiece
  • 12VDC/ 90-240VAC Power Supply
  • 10 ft. USB 2.0 Interface Cable
  • 10 ft. Standard Guider Cable
  • QSI Installation CDROM
  • Drivers for MaximDL/CDC and CCDSoft
  • ActiveX Developer's Kit
  • Custom Fit Pelican Storage Case
Questions & Answers

Product Questions

No questions yet. Be the first to ask the question!
Support / Downloads