QSI 6120ws-8 12 mp Cooled CCD Camera
QSI 6120 model cameras make use of a new 12 megapixel Sony CCD imaging sensor. This sensor provides exceptional sensitivity with peak QE of 77%. The QSI 6120's strong sensitivity along with its expansive dynamic range, dual read rates, low noise efficacy, and integrated 5 or 8-position color filter wheel make it perfectly appropriate for a wide range of difficult scientific, astronomical, medical, and industrial imaging operations.
QSI 6120ws-8 Monochrome CCD Camera Features...
- 12 megapixel Sony ICX834 sensor
- 3.1µm pixel offers high resolution
- High Speed USB 2.0 and read rates up to 8 MHz
- Two stage TEC with cooling to 40°C below ambient
- Electronic shutter w/ exposures to 100µsec
High Performance CCD Image Sensor
One of the most crucial factors in the compact design of QSI 600 series cameras is a supremely effective custom two stage thermoelectric cooler (TEC) subsystem. Heat produced by the cooler is removed by intelligent, programmable cooling fans located at the back end of the camera body. Controlled CCD temperature is commonly lowered by up to 45ºC below ambient making use of 85% power through forced air cooling. Compact temperature regulation of +/- 0.1°C is preserved at temperature levels of 10ºC below ambient and less. The rear of the camera body accepts a slim liquid heat exchanger for increased cooling of up to 55ºC below the circulating fluid's temperature.
The QSI 6120 features a 4250 x 2838, 3.1µm pixel imaging sensor that offers especially high resolution. Unvignetted, filtered images are possible even with extremely fast optical systems as a result of the QSI 6120's internal 8-position color filter wheel on top of its compact build.
The Sony ICX834 12 megapixel interline transfer CCD imaging sensor with microlens technology employed by the QSI 6120 camera has remarkable sensitivity over the visual band with a 77% peak quantum efficiency to go with exceptionally low dark current. Additionally, the ICX834 sensor provides antiblooming protection with a fast electronic shutter. Optical response is bolstered through micro lenses that cover the CCD's surface to focus light onto each pixel.
Efficient Low Power CCD Sensor Cooling
CCD Cooler Subsystem
The cooled CCD image sensor is located in a hermetically enclosed environmental compartment with an anti-reflection coated precision optical window covering. This compartment is cleansed with a super dry noble gas for a boost in heat conduction and the removal of possible frost assembling inside the chamber. In order to increase the useful period before re-purging is necessary, a user-rechargeable microsieve desiccant is used to collect water molecules that infiltrate the chamber. This desiccant can be found behind a sub-micron, gas-permeable membrane to avoid harsh contamination of the CCD chamber.
Shutters & Filter Wheel
Electronic Shutter This QSI 6120ws-8 model employs an electronic shutter integrated into the Sony ICX834 CCD image sensor for exposure control. Shutter timing is very strict and ranges from as brief as 100 microseconds all the way to 240 minutes. This quick acting shutter is attainable as a result of two important features of the interline transfer construction.
- Any existing electrons may be instantly eliminated from the pixels through a single electronic pulse, beginning the exposure.
- Following the specified exposure period, the entire image field can be promptly transferred to a light-shielded holding area on the CCD. This allows the image to be read out at the normal rate without being polluted by any stray light left behind on the CCD surface.
Mechanical Shutter An internal even-illumination mechanical shutter is also included with the 6120ws-8 model. With an interline transfer CCD such as the ICX834, exposures are made by the electronic shutter. The job of the mechanical shutter is to cover the CCD and make the creation of Dark and Bias frames for ensuing image processing easier.
8-Position Color Filter Wheel In addition, a larger eight-position color filter wheel that accepts either standard thread 1.25" or unmounted 31mm filters comes with the 6120ws-8 camera. The short back focus and reduced spacing offered by this internal color filter wheel gives this 6120ws-8 camera the ability to achieve a complete lack of vignetting even when working with optics faster than f/2.8. To exchange or clean the filters, the wheel can be easily detached.
Connectivity & Notification
The connector panel is generously recessed into the camera body for protection and convenient access to all external connections. An optional cable restraint system may be joined to the rear of the camera body via two threaded holes for reinforcement of the electrical connections as well as the recirculation hoses when the liquid heat exchanged is being used.
USB Interface Like all QSI 600 series cameras, the 6120ws-8 employs a High Speed USB 2.0 port (USB 1.1 compatible) to link up with, a host computer and imaging application software. Common read and transfer times for an entire 2048 x 2048 image frame are half a second in High Speed mode and under seven seconds in High Quality mode. The frame rate can be expanded even further with flexible on-chip binning or by reading only a fragment of the image (ROI).
Power Requirements Superior power efficiency is a well-established strength of 600 series cameras. Power consumption for the 6120ws-8 is 24 watts at max cooling, fans, and filter movement. Includes a certified 12v DC power supply with a 90-240V, 50-60HZ input voltage range scope.
Notification All 600 series cameras feature both integrated visual and audible notification. Visual feedback of different camera operation conditions are provided via a multi-color LED status display, while audible feedback is provided through a one-of-a-kind internal beeper. Both visual and audible indicator behavior can be configured or even disabled by the user.
QSI Product Number: 6120WS-8
- Additional Information
SKU QS-6120WS-8 Manufacturer QSI Color or B&W? Monochrome (B&W) Sensor Type Interline Transfer Series QSI 600 Pixel Size < 5 Microns Warranty 1 Year Warranty Sensor Manufacturer Sony # of Sensors Single Sensor Sensor Model ICX834 Anti-Blooming Sensor? yes Quantum Efficiency Peak: 77% at 560nm Pixel Size in Micrometers 3.1µm x 3.1µm Pixel Array 4250 x 2838 Minimum Exposure Time 0.0001 seconds Maximum Exposure Time 14,400 seconds Integrated Guider? No Shutter Type Digital & Mechanical Dark Current <0.002 electrons per second at -10°C Filter Wheel Yes Interface USB 2.0 Camera Cooling Type Thermo-electric Cooling (TEC) Camera Body Dimensions 4.45" x 4.45" x 2.5" Camera Weight 40 oz.
- Included Items
- QSI 6120ws-8 12 mp Cooled CCD Camera
- 8-Position Color Filter Wheel
- Mechanical Shutter
- T-Mount Camera Adapter & Cover
- 2" Nosepiece
- 12v DC/ 90-240VAC Power Supply
- 10' USB 2.0 Interface Cable
- 10' Standard Guider Cable
- QSI Software Installation CD-Rom
- Drivers for MaxIm DL/ CCD and CCDSoft
- ActiveX Developer's Toolkit
- Custom Fit Pelican Storage Case
- Questions & Answers
Product QuestionsNo questions yet. Be the first to ask the question!
- Support / Downloads